Carbon nanotubes (CNTs) were incorporated into alumina/polyethersulfone hollow fibre membranes to enhance the mechanical property and the efficiency of water treatment. Results show that the incorporation of CNTs can greatly limit the formation of large surface pores, decrease the void size in support layers and improve the porosity and pore connectivity of alumina/polyethersulfone membranes. A...

Removal of endocrine disrupting compound (viz., bisphenol A, BPA) by laboratoryfabricated hollow fiber polyethersulfone (PES) nanofiltration (NF) membranes have been investigated. The tailor made charged PES hollow fiber NF membranes have been developed by blending negatively charged surface modifying macromolecule (cSMM). It is resulted more than 90% removal of BPA, mainly due to negatively ch...

Hydrophilic polyethersulfone (PES) hollow fiber membranes were prepared via non-solvent induced phase separation (NIPS) by addition of polymeric additives as a membrane modifying agent. The effect of the addition of hydrophilic surfactant Pluronic F127, Polyivinylpyrrolidone (PVP), and Tetronic 1307 on the performance of the final PES hollow-fiber membrane was investigated. The morphology of fa...

The development of models that predict membrane performance has contributed a better understanding of the basic principles and mechanisms of solute rejection and deposition. It also serves as fundamental properties that allow specific characterization determination. This work fabricates hollow fiber membranes using Polyethersulfone (PES). The membranes were fabricated in-house using phase inver...

oily wastewaters from oil refineries and oil distribution centers are one of the most important environmental concerns in recent decades; therefore, it is critical to treat these types of wastewaters. in this study, the performance of different polyethersulfone hollow fiber membranes in oily wastewaters treatment was investigated and the effects of operating conditions such as transmembrane pre...

chitosan/polyethersulfone (cs/pes) composite membrane was prepared from casting chitosan solution on polyethersulfone substrate membrane. the substrate membrane was prepared by phase inversion technique using polyethersulfone (pes) and dimethylacetamide (dmac) as solvent with and without the addition of polyvinylpyrrolidone (pvp) as pore-forming agent. the effects of the composition of the c...

0079-6425/$ see front matter 2012 Elsevier Lt http://dx.doi.org/10.1016/j.pmatsci.2012.07.002 ⇑ Corresponding author. Tel.: +86 28 85400453; E-mail addresses: [email protected], zhao Significant progress has been achieved in the last years on the modification of polyethersulfone (PES) membranes. Many articles and reviews have been written on the development in the area of PES membrane modif...

Chitosan/polyethersulfone (CS/PES) composite membrane was prepared from casting chitosan solution on polyethersulfone substrate membrane. The Substrate membrane was prepared by phase inversion technique using polyethersulfone (PES) and dimethylacetamide (DMAc) as solvent with and without the addition of polyvinylpyrrolidone (PVP) as pore-forming agent. The effects of the composition of the c...

In this study, polyethersulfone (PES) hollow fiber membranes (HFM) were fabricated with different weight percentage (wt. %) of polymer at 16 wt. %, 18 % and 20 in order to study the impact percentages on membrane properties its dye rejection performance. Microfiltration HFM by using laboratory dry-wet spinning method. improve pore structure membrane, 3 (PVP) 8000 M.W. was added dope solution. A...

Humidification process is one of the applications of membrane contactor in which partial pressure of a vapor in the gas stream increases. In this study, two different polyethersulfone and polyetherimide hollow fiber membranes were fabricated and characterized by various test methods and their performance in humidification process under different operating conditions was investigated. The PES me...