: a new fibrous adsorbent was prepared by grafting acrylic acid /acryl amide (aa/aam) co-monomers onto poly(ethylene terephtalat) (pet) fibers. the resulting sorbent has been characterized by fourier transform infrared spectroscopy (ft-ir), thermo gravimetric analysis (tga), scanning electron microscopy (sem) and elemental analysis and studied for the preconcentration and determination of trace...

Each year about 50 Million tons polymer is processed to fibers worldwide [1]. Polymeric fibers are manufactured into all sorts of daily as well as industrial goods [2, 3]. The most prominent materials are thermoplastic among which poly(ethylene terephtalat) (PET), polyamides (PA) and polypropylene (PP) make up the largest fraction [4]. Other thermoplastic polymers such as poly(vinylidene fluori...

low temperature plasma technology is well established in surface modification of polymer materials on industrial scale. this method modifies surface properties of polymers without chemicals, manual work and reducing chemicals and energy consumption. in this study, low pressure plasma treatment was used to develop hydrophilic properties of polyethylene terephthalate (pet) fabrics. it was found t...

Dyeing properties of compounded polyethylene terephthalate fibers with a polyesteramide hyperbranched polymer were investigated in terms of their thermodynamic parameters, including standard affinity -Δμ⁰, enthalpy change ΔH⁰ and entropy change ΔS⁰. Results were then compared with corresponding properties of the virgin PET. The results showed that the isotherms were similar to that of virgin PE...

: A new fibrous adsorbent was prepared by grafting Acrylic Acid /Acryl Amide (AA/AAm) co-monomers onto Poly(Ethylene Terephtalat) (PET) fibers. The resulting sorbent has been characterized by Fourier Transform InfraRed spectroscopy (FT-IR), Thermo Gravimetric Analysis (TGA), Scanning Electron Microscopy (SEM) and elemental analysis and studied for the preconcentration and ...

Plastics have prominent utilization worldwide. Polyethylene Terephthalate (PET) is one of the major types of plastics that can be found in the Municipal Solid Waste (MSW) [1]. MSW contains high proportion of thermoplastic polymers which has been increasing in value. PET is a semi-crystalline thermoplastic polymer, and is considered as polyester material [2]. Large amount of waste PET is being p...

pp/pep blends, because of different solubility factors, are incompatible. the aim of this research was to use pp-g-ma compatibilizer in a two-component blend. after preparing this compatibilizer in internal mixer and investigating different parameters on producing process, optimum compatibilization was obtained. pp/pet (60/40) blend fibers with different percentages of this compatibilizer in tw...

This report deals with the experimental investigation of using large deformable FRP, ± 45° oriented fibers, in concrete-filled fiber tubes (CFFT) under axial cyclic compressive loading. In addition, this report presents finite element modeling (FE) of CFFTs with large rupture strain FRP (LRS-FRP). The LRS-FRP is made with polyethylene naphthalate (PEN) and polyethylene terephthalate (PET) fiber...

Recycling polyethylene terephthalate (r-PET) bottles is a sustainable solution for reducing the accumulation of r-PET in landfills. The primary goal this study to determine viability combining fibers derived from waste and date palm (DPF) produce hybrid unsaturated polyester (UP)-based composites. Hand lay-up was used make UP/r-PET/DPF composites, which had 10%, 20%, 30% by weight, with equal w...

The use of virgin and recycled plastic macro fibers as reinforcing elements in construction materials has recently gained increasing attention from researchers. Specifically, have become more attractive owing to their large-scale availability, negligible cost, low environmental footprint. In this work, we investigate the benefits related fully-recycled synthetic dispersed reinforcement Fiber Re...