a hydrothermal method for preparation of nano-size zirconia has been studied to optimize the effective parameters (precursor concentration, temperature and time) using response surface methodology (rsm). the synthesized zirconia samples were characterized through x-ray diffraction (xrd), scanning electron microscope (sem) and transmission electron microscopy (tem) analyses to identify mean nano...

Objective. The aim of this study was to evaluate the effect of incorporation of glass fiber, zirconia, and nano-zirconia on the transverse strength of repaired denture base. Materials and Methods. Eighty specimens of heat polymerized acrylic resin were prepared and randomly divided into eight groups (n = 10): one intact group (control) and seven repaired groups. One group was repaired with auto...

Shape and size of the synthesized NiO nano-sheets were retained during transformation of sheet-like b-Ni(OH)2 to NiO at elevated temperatures via nano-sized zirconia coating on the surface of b-Ni(OH)2. The average grain size was 6.42 nm after 600 C treatment and slightly increased to 10 nm after 1000 C treatment, showing effective sintering retardation between NiO nano-sheets. The excellent th...

Porous yttria-stabilised zirconia ceramics have been gaining popularity throughout the years in various fields, such as energy, environment, medicine, etc. Although yttria-stabilised zirconia is a well-studied material, voided yttria-stabilised zirconia powder particles have not been demonstrated yet, and might play an important role in future technology developments. A sol-gel synthesis accomp...

A hydrothermal method for preparation of nano-size zirconia has been studied to optimize the effective parameters (precursor concentration, temperature and time) using response surface methodology (RSM). The synthesized zirconia samples were characterized through X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscopy (TEM) analyses to identify mean nano...

Hydroxyapatite (HA)ynano-zirconia composite coatings were successfully produced through high velocity oxy-fuel (HVOF) spraying of radio frequency (RF) plasma synthesized powders. Microstructure characterization and morphology analysis on the nano-structured coatings were conducted using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), and d...

in the current study, synthesis and characterization of a new nano-structured zirconium(iv)-minoxidil complex (1), where minoxidil, (c9h15n5o; 6-(1-piperidinyl)-2,4-pyrimidinediamine 3-oxide), have been investigated in two different solvents. the compound 1 has been synthesized by sonochemical method in the presence of methanol and monoethylene glycol (meg) as solvents and characterized by scan...

Zirconia doped Hydroxyapatite (HAP) nanocrystals [Ca10(PO4)6-x(ZrO2)x(OH)2]; (0 ≤ x ≤ 1 step 0.2) were synthesized using simple low cost facile method. The crystalline phases were examined by X-ray diffraction (XRD). The crystallinity percentage decreased with increasing zirconia content for the as-synthesized samples. The existence of zirconia as secondary phase on the grain boundaries; as obs...

Nitration of toluene has been studied in the liquid phase over a series of modified zirconia catalysts. Zirconia, zirconiaceria (Zr0.98Ce0.02)O2, sulfated zirconia and sulfated zirconiaceria were synthesised by co precipitation method and were characterised by X-ray diffraction, BET surface area, Infra red spectroscopy analysis (FTIR), Thermogravimetric analysis (TGA), Scanning Electron Microsc...

Degradation of yttria-stabilized zirconia dental implants abutments due to the tetragonal to monoclinic phase transformation was studied in detail by microstructural characterization using Electron Back Scatter Diffraction (EBSD). The amount and distribution of the monoclinic phase, the grain-size distribution and crystallographic orientations between tetragonal and monoclinic crystals in 3 mol...