the medium density fiberboard (mdf) market demand was investigated during the years from 2004 to 2013 in iran. estimation of mdf demand was made by exponential smoothing method by the year 2018. the insight into the level of demand that might exist by the year 2013 was obtained by reviewing the production, import, export, and consumption of mdf on the iran. the results show that the consumption...

In this study wheat straw was taken from Ankara province. In order to produce dry process MDF, urea formaldehyde resin was used at the ratio of 8 %, 10 % and 12 %, 1 % ammonium chloride was used as hardening agent on the basis of dry fiber weight. On the other hand, 5, 6 and 7 min. pressing times were applied. Alcohol benzene, cold water, hot water and 1 % NaOH solubility of wheat straw were 5....

This study was aimed to study the probability about the production of fiberboard made of durian rind through latex with phenolic resin as binding agent. The durian rind underwent the boiling process with NaOH [7], [8] and then the fiber from durian rind was formed into fiberboard through heat press. This means that durian rind could be used as replacement for plywood in plywood industry by usin...

Pneumonitis due to hypersensitivity to wood fiber is mainly associated with the fungus that colonizes it. We present the case of a male affected with hypersensitivity pneumonitis in which the agent implicated was medium-density fiberboard, an engineered product whose main component is pine wood fiber. The causal agent was identified by means of a specific bronchial provocation test.

Medium-density fiberboards of acceptable quality were made from a mixture of barky chips from 14 southern hardwoods. Boards made from fiber refined at three different plate clearances did not vary significantly in bending, internal bond (IB), or linear expansion. But, lack of replications and the fact that the refiner was not loaded to capacity caused these results to be inconclusive. Increasin...

the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...

the target of this study was to investigate the possibility of mdf productionfrom eucalyptus camaldulensis wood. mdf fibers were produced applying threelevels of steaming time. laboratory mdf boards were produced using thegenerated fibers and different pressing temperature and time. physical andmechanical properties of mdf panels were measured using relevant eu testmethods and were statisticall...