نتایج جستجو برای: injection (oil well)
تعداد نتایج: 1778784 فیلتر نتایج به سال:
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
چکیده ندارد.
Steam injection is the most suitable of Enhanced Oil Recovery (EOR) methods to recover high viscosity oil. This is due to the capabilities of steam to reduce oil viscosity and increase the sweep capability of oil from the injection well toward the production well. Oil operating conditions in production should be match well with the operating condition target at the bottom of the production well...
Biocorrosion is a phenomenon that strongly affects the integrity of materials used in oil and gas industry. Different types biocides are currently to control bacteria industrial water; however, they have disadvantages such as microbial resistance these chemical compounds possible impact on biodiversity due eventual contamination natural water. There several alternatives for elimination or bacte...
one of the mostly used enhanced oil recovery methods is the injection of water or gas under pressure to maintain or reverse the declining pressure in a reservoir. several parameters should be optimized in a fluid injection process. the usual optimizing methods evaluate several scenarios to find the best solution. since it is required to run the reservoir simulator hundreds of times, the process...
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
in this work, a novel and fast method for direct analysis of volatile compounds (davc) of medicinal plants has been developed by holding a filament from different parts of a plant in the gc injection port. the extraction and analysis of volatile components of a small amount of plant were carried out in one-step without any sample preparation. after optimization of temperature, extraction time a...
in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...
چکیده ندارد.
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید