this paper introduces an innovative partially destructive method, called “twist-off”, for the assessment of in situ concrete strength. in this method a 40mm diameter metal probe is bonded to a concrete surface by means of a high strength epoxy resin adhesive. to measure the concrete compressive strength, a torque is applied using an ordinary torque-meter and the maximum shear stress at failure ...

abstract since for some reasons such as studying the behaviour of old construction materials and proper replacement of the deteriorated sections, adequate knowledge about the true in situ strength of the construction materials has become a necessity, many attempts have been made to invent and develop new in situ methods in recent years. most of these methods measure the in situ strengths of mat...

As a vibration- free concrete, self- compacting concrete (SCC) can be easily used in the absence of consolidation, therefore; it is a good option for repairing and retrofitting concrete structures. The quality of repair layer is highly effective on a successful repair. Accordingly, in this study, factors affecting the quality of fiber-reinforced self-compacting concrete repair layer, including ...

Polymer modified concrete (PMC) consists of Portland cement concrete with a polymer modifier. Its advantages are proper bonding strength to substrate concrete, high tensile and flexural strength and low amount of shrinkage and permeability. Using PMC overlays can be considered as a method for preservation of damaged concrete structures due to their suitable performance and durability. In this r...

In this paper, aluminum alloy samples were fabricated by selective laser melting (SLM) and subsequently T2 heat treatment was undertaken. In order to obtain comprehensive results, various experiments on densification, hardness, tensile strength, bending strength and microstructure characterization were carried out. The results show that densification of samples after T2 heat treatment does not ...

In situ Al2024- Mg2Si composite was fabricated by spark plasma sintering (SPS) of reactive powder. Reactive powder was obtained from mechanical alloying (MA) of elemental powders. Clad layers of in situ composite were fabricated on Al substrates by spark plasma sintering (SPS). Structural evolution during MA process and after SPS was investigated by X-ray diffractometery (XRD). Scanning electro...