A detailed study on visible light photocatalytic degradation of methylene blue (MB) has been investigated in aqueous heterogeneous media containing hexagonal phase molybdenum oxide (h-MoO3) nanocrystals (NCs) which was identified as a new material for visible light driven photocatalysis. A simple and template-free solution based chemical precipitation method was employed to synthesize h-MoO3 NC...

AMoO3–carbon nanocomposite was synthesized from amixture ofMoO3 and graphite by a controlled ball milling procedure. The as-prepared product consists of nanosized MoO3 particles (2–180 nm) homogeneously distributed in carbon matrix. The nanocomposite acts as a high capacity anode material for lithium-ion batteries and exhibits good cyclic behavior. Its initial capacity exceeds the theoretical c...

Atomic force microscopy and X-ray diffraction have been used to characterize the structural evolution of the MoO3(010) surface during gas phase reactions with nitrogen-alcohol (methanol, ethanol, and 2-propanol) mixtures between 200 and 400◦C. Our results demonstrate that MoO3 intercalates H during these reactions (T≥ 300◦C) and that protonation leads to the precipitation of a well known hydrog...

Herein, a novel Cu-MoO3/g-C3N4 hybrid nanocomposite was successfully synthesized by a two-step strategy of one-pot pyrolysis followed by the impregnation method. The structure, phase, morphology and electronic environment of MoO3, g-C3N4 and Cu in the composite were determined by various characterization methods. The oxygen vacancies of MoO3 were ascertained by UV-DRS, Raman, and XPS analysis. ...

This paper presents the experimental evidence of reversible insulator–metal transition (IMT) in thin-film amorphous molybdenum trioxide (MoO3) induced by electric fields just a few volts. The presence oxygen vacancies MoO3 is considered to play significant role reported IMT. not only impact stoichiometry but also optical bandgap. subthreshold slope for IMT 10 nm-thick MoO3-based devices 48.3 mV...

Despite a favourable morphology, anodized and ordered TiO2 nanotubes are incapable of showing electrochromic properties in comparison to many other metal oxide counterparts. To tackle this issue, MoO3 of ~5 to 15 nm thickness was electrodeposited onto TiO2 nanotube arrays. A homogenous MoO3 coating was obtained and the crystal phase of the electrodeposited coating was determined to be α-MoO3. T...

The interfacial reaction and energy level alignment at the Si/transition metal oxide (TMO, including MoO3-x, V2O5-x, WO3-x) heterojunction are systematically investigated. We confirm that the interfacial reaction appears during the thermal deposition of TMO, with the reaction extent increasing from MoO3-x, to V2O5-x, and to WO3-x. The reaction causes the surface oxidation of silicon for faster ...

We exploit the utilization of two-dimensional (2D) molybdenum oxide nanoflakes as a co-catalyst for ZnO nanorods (NRs) to enhance their photocatalytic performance. The 2D nanoflakes of orthorhombic α-MoO3 were synthesized through a sonication-aided exfoliation technique. The 2D MoO3 nanoflakes can be further converted to substoichiometric quasi-metallic MoO3-x by using UV irradiation. Subsequen...

Two-dimensional and layered MoS2 is a promising candidate for next-generation electric devices due to its unique electronic, optical, and chemical properties. Chemical vapor deposition (CVD) is the most effective way to synthesize MoS2 monolayer on a target substrate. During CVD synthesis, sulfidation of MoO3 surface is a critical reaction step, which converts MoO3 to MoS2. However, initial rea...

The supplementary data have included a full range of TEM pictures of the post-run samples, including 400 oC calcinated MoO3/H-ZSM-5 samples (coked) and the parent H-ZSM-5 (coked), showing the distribution of Mo clusters on the zeolite crystallite external surface, and the observed coke deposition upon the spreading of the Mo species. The Figures S1-S9 are the complementary of the Fig. 8 in the ...