نتایج جستجو برای: grinding time
تعداد نتایج: 1898436 فیلتر نتایج به سال:
copper smelting slags are hard materials. therefore,to recover their copper by flotation method, grinding should be carried out to obtain optimal particle size. copper smelting slags in the bardeskan district, with work index of 16.24 kwh/st, were grinded for 65 minutes to reach an acceptable degree of freedom for the flotation tests, with particle size of 80%, smaller than 70 μm. with this gri...
An environmentally benign, fast and convenient protocol has been developed for the Michael addition of 1,3-dicarbonyl compounds to β-nitroalkenes in good to excellent yields by a grinding method under catalyst- and solvent-free conditions.
Copper smelting slags are hard materials. Therefore,to recover their copper by flotation method, grinding should be carried out to obtain optimal particle size. Copper smelting slags in the Bardeskan district, with work index of 16.24 kwh/st, were grinded for 65 minutes to reach an acceptable degree of freedom for the flotation tests, with particle size of 80%, smaller than 70 μm. With this gri...
in this research, the effects of temperature, time and grinding on the types of phases in the calcined kaolin and calcite mixture was investigated. differential thermal analysis (dta) and x-ray diffraction of samples showed that gehlenite is formed at 990 ˚c as the main phase which transforms into anorthite with an increase in the temperature to 1200 ˚c. after grinding the mixture and with incr...
This research is to investigate the dynamic characteristics of the grinding process. A kind of robust grinding wheel reciprocating arrangement is schemed out, which realizes the precise point-grinding machining. The grinding wheel reciprocating movement is driven by a linear motor to replace the traditional crank or hydraulic pressure drive device. Based on the time series method, the modal exp...
Abstract: the changes of BET surface area of a mineral substance during intensive grinding process. Validity of the proposedmodel was tested by the experiments performed using a natural chalcopyrite mineral as well as the published data. Itwas shown that the model can predict the experimental results with a very good accuracy and can be used to predictwhat may happen under the similar experimen...
The surface of zirconia may be damaged during grinding, influencing the mechanical properties of the material. The purpose of this study was to compare the flexural strength of zirconia after different grinding procedures. Twenty bar-type zirconia specimens (21 x 5 x 2 mm) were divided into 4 groups and ground using a high-speed handpiece or a low-speed straight handpiece until the bars were re...
Vitreousness and Stenvert kernel hardness characteristics in corn germplasm have been related to in situ and in vivo starch digestibility in lactating dairy cows. Because of the tedious nature of determining vitreousness by manual dissection or conducting Stenvert hardness measurements, it is challenging to screen corn germplasm for animal performance potential. The resistance of corn to grindi...
BP neural network is applied to control the amount of feed, which is the key problem during the constant-force grinding. Firstly, BP neural network is constructed. Because its convergence is slow and local minimums often occur, the adaptive learning rate is used and certain momentums are added to improve BP neural network. Then the feature parameters in time and frequency domain are picked up i...
BACKGROUND In equine practice, teeth corrections by means of motorized grinding systems are standard procedure. The heat resulting from that treatment may cause irreparable damage to the dental pulp. It has been shown that a 5.5°C temperature rise may cause severe destruction in pulp cells. Hence, the capability to continuously form secondary dentine is lost, and may lead, due to equine-typical...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید