in this study, al/gr composites with 5,10,15,20 weight percent of graphite were produced by in-situ powder metallurgy method. the produced powder mixtures were consolidated and sintered at optimum conditions. the resultant composites were solution treated at 495?c and aged at 170?c. the influence of graphite content on the bending strength of composites was studied. the distribution of graphite...

in this study, aluminium2024- graphite composites containing 5, 10, 15 and 20 weight percent of graphite were produced by solid assisted melt disintegration (samd) technique which resulted in production of al/gr powder mixtures which subsequently consolidated and sintered for preparation of al/gr composites. in this technique, powder mixture was prepared by addition of flake graphite (mean diam...

We present the electronic structure evolution from graphite oxide to thermally reduced graphite oxide. Most functional groups were removed by thermal reduction as indicated by high resolution X-ray photoelectron spectroscopy, and the electrical conductivity increased 6 orders compare with the precursor graphite oxide. X-ray absorption spectroscopy reveals that the thermally reduced graphite oxi...

In order to compare and evaluate the atomization process occurring in several types of graphite furnaces for atomic absorption spectrometry, the authors estimated temporal variations in the gas temperature by using a two-line method under the assumption of a Bolzmann distribution. The atomization furnaces employed were a graphite tube, a graphite tube coated with pyrolitic carbon, a graphite tu...

low water-wettability and oxidation resistance of graphite have limited its application in carbon containing refractory castables. the aims of this study were improvement of water-wettability and the oxidation resistance of natural flaky graphite by applying an oxide coating on its surface. to develop the coating, magnesium aluminate spinel sol was formulated via a citrate-nitrate route and gra...

production of fe-c alloy powders by mechanical alloying was studied. fe and graphite elemental powdermixtures containing 0.8 and 1.5wt.% graphite were mechanically alloyed using a planetary ball mill. thestructural changes of powder particles during mechanical alloying were studied by x-ray diffractometery,scanning electron microscopy and microhardness measurements. for both compositions, mecha...

The present paper deals with the design of experimental work matrices for two groups of experiments by using Response surface methodology (RSM). The first EDM group was dealt with the use of kerosene dielectric alone, while the second was treated by adding the graphite micro powders mixing to dielectric fluid (PMEDM). The total heat flux generated and fatigue lives after EDM and PMEDM models we...

Graphite or plumbago is a crystalline form of carbon which occurs in nature as soft black masses or, less commonly, as crystals in igneous rocks: this natural graphite contains varying proportions of other minerals. Graphite is also made artificially from coke, and the best preparations of this kind are nearly pure carbon. This paper will deal with some of the effects of natural graphite, and t...

Ultrasonic exfoliation of expanded graphite compound obtained by cold expansion of graphite intercalated with peroxodisulfuric acid was shown to allow the creation of graphene nanoplatelets with thickness of about 5-10 nm. The resulting graphene material contained surface oxide groups. The expanded graphite intercalation compound was exfoliated by ultrasound much easier than thermally expanded ...

Palladium nanoparticles encapsulated into graphite (Pd–graphite intercalation compound: Pd–GIC) were produced from two kinds of graphite, natural graphite (average flake size: 270 mm) and kish graphite (average flake size: 15 mm). Hydrogen storage properties of Pd– GIC have been investigated by means of differential scanning calorimetry (DSC) between 473 and 573 K at 1.0 MPa hydrogen pressure. ...