introduction: the aim of this study was to evaluate the influenceof different light curing systems and curing times on the micro-hardness of aresin modified glass ionomer. methods: forty two samples of resinmodified glass ionomer (rmgi) were prepared using stainless steel cylindrical mold(8 × 2 mm) and randomly divided into six groups of seven. three groups werecured with a quartz tungsten halo...

Micro-channels are made over the Ag+/Na+ ion-exchanged soda-lime glass surface by interaction of an intense Ar+ laser beam and the silver ions inside the glass matrix. The Ar+ laser beam reduces the Ag+ ions inside the matrix. The Ag+ atoms aggregate into silver nano-clusters around the interaction area, inside the glass matrix. Aggregation of the silver atoms and the thermal effects of the int...

the miscible displacement process appears to be an increasingly feasible method for the extraction of oil from depleted reservoirs. how­ever, there is a lack of fundamental understanding of how fracture geometrical characteristics impact the oil recovery efficiency in this type of enhanced oil recovery technique. in this work, a series of experimental tests were conducted whereby the n-heptane ...

A novel foaming process-chemical foaming process (CFP)-using foaming agents to fabricate wafer-level micro glass cavities including channels and bubbles was investigated. The process consists of the following steps sequentially: (1) shallow cavities were fabricated by a wet etching on a silicon wafer; (2) powders of a proper foaming agent were placed in a silicon cavity, named 'mother cavity', ...

In this paper a two-step glass wet-etching process is presented. This process allows the fabrication of well-defined shallow recesses (typically 1-40μm) together with deep trenches or waferthrough holes (100-500μm) in the same glass wafer. The etching solutions and the masking materials used are described for the three glass types frequently used in sensor fabrication. This process is developed...

adequate bond strength between glass ionomer cements and composite resin is necessary for the success of the sandwich technique.this study assessed the micro-shear bond strength of composite resin to glass-ionomer cements (gic) using self-etch adhesives with different ph values.one hundred specimens (6×4×2 mm) were made using fuji ii and fuji ii lc gics and treated with different adhesives as f...

This study investigated the feasibility of the micro powder blasting technique for the micro fabrication of sensor structures using the Pyrex glass to replace the existing silicon-based acceleration sensor fabrication processes. As the preliminary experiments, the effects of the blasting pressure, the mass flow rate of abrasive and the number of nozzle scanning times on erosion depth of the Pyr...

porous hollow glass microspheres have many uses, including encapsulation of active materials. in this paper a fast and facile method for fabricating porous hollow glass-microspheres was demonstrated by etching them using dilute hydrofluoric acid. then, a highly reactive amine was infiltrated into the etched glass microspheres. scanning electron microscopy was conducted for the hollow glass micr...

This paper presents processes for glass micromachining, including sandblast, wet etching, reactive ion etching (RIE), and glass reflow techniques. The advantages as well as disadvantages of each method are presented and discussed in light of the experiments. Sandblast and wet etching techniques are simple processes but face difficulties in small and high-aspect-ratio structures. A sandblasted 2...

Theoretical concepts of F-value, water activity and glass transition are the most successful in determining food stability during food processing and storage. The water activity and glass transition concepts are progressed by combining these concepts in a stability map named as state diagram. The first part of this paper provides stability criteria based on Fvalue, water activity, glass transit...