partial replacement of formaldehyde with furfural in the urea-formaldehyde resin on the formaldehydeemission, physical and mechanical properties of particleboard was investigated. the modulus ofrupture (mor), modulus of elasticity (moe), internal bond (ib), water absorption (wa), thicknessswelling (ts) and formaldehyde emission (fe) of poplar particleboards made with the modifiedresins were mea...

there are adequate sources for wood adhesives, but scarcity of oil resources can affect the cost and future availability of oil based resins. for avoiding of this process, seeking for feasibility of replacement of these oil feedstocks is necessary. in present work, thermal behavior of urea formaldehyde resin modified by furfural was investigated. the thermo-gravimetry was used for this purpose,...

The objective of this study was to manufacture particleboard made from UF with low formaldehyde (E1) for use in indoor environments. The influence of UF in particles on the formaldehyde emission and its mechanical properties were investigated. The experimental results showed that the formaldehyde emission released decreased linearly with consumption UF-low formaldehyde- particle. Formaldehyde e...

To discuss the reduction of formaldehyde and volatile organic compound (VOC) emissions from engineered flooring, cashew nut shell liquid (CNSL)-formaldehyde (CF) resin and CF/PVAc resin were applied for the maple face of the veneer bonding on plywood. The CF resin was used to replace urea-formaldehyde (UF) resin in the formaldehyde-based resin system in order to reduce formaldehyde and VOC emis...

Urea-formaldehyde (UF) resin (F/U: 1.25), melamine-urea-formaldehyde (MUF) resin (F/(U+M): 1.05), and three kinds of wood species including poplar (Populus davidiana Dode), beech (Fagus engleriana Seem.), and eucalyptus (Eucalyptus robusta Smith) were used to produce plywood. The effects of sealing treatment and wood species on the formaldehyde emissions were studied. The anatomical characteris...

Uron resin, a kind of urea-formaldehyde (UF) resin containing much more uron structure, were prepared. Several modi ed UF resins were obtained from mixing uron resins with normal UF resins as well as synthesizing UF resin with uron resin as raw material. is work demonstrated that the introducing of the uron structure reduced free formaldehyde content of UF resin and formaldehyde emission levels...

For the development of a cost-effective melamine-modified urea formaldehyde resin (MUF), the study evaluated the effects of reaction pH and melamine content on resin properties and bond performance of the MUF resin adhesive systems. Eight resins, each with three replicates, were prepared in a factorial experiment that included two formulation variables: two reaction pHs (i.e., 4.5 and 8.0) and ...

The objective of this project was to use sucrose as a partial substitute for melamine in the synthesis of sucrose–melamine-formaldehyde (SMF) resin. The SMF was synthesized in a base condition. The wet bonding strength, shelf life, and formaldehyde emission of the SMF resin were determined. Fourier transform infrared spectroscopy (FT-IR) and mass spectroscopy (MS) were employed to analyze the c...

To upgrade the performance of urea-formaldehyde (UF) resin bonded particleboards, melamine modified urea-formaldehyde (MUF) resins based on strong acidic pH catalyzed UF polymers were investigated. The study was conducted in a series of two experiments: 1) formulation of MUF resins based on a UF polymer catalyzed with strong acidic pH and 2) determination of the effects of increased melamine co...