in the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. in this study, a series of compression tests were simulated using abaqus software. in this study, it has been employed the taguchi method to design experiments by the factor...

0

In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...

[1] In the study of natural rivers, accurate conveyance estimation is challenging because of complex cross-sectional geometry and variable flow resistance. The aim of this study was to investigate the additional friction factor due to lateral momentum transfer at the interface of vegetated and nonvegetated channel parts in two rivers: (1) the Rhine River, a large dredged river with partially ve...

The objective of the current experimental program is to generate data for liquid flow through micro-channels. The channel dimensions are 0.9 mm deep x 0.5 mm width. Rectangular seven micro-channels each of 70 mm long were cut on a stainless steel substrate (100 mm x 100 mm x 10 mm) by Electro Discharge Machining (EDM) technique. Covering the top with another plate formed the channels. The liqui...

In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...

Due to the need for practical cooling technologies which could dissipate high heat fluxes, an experimental study of pressure drop in micro-channel was performed. In this work, laminar flow friction factors were determined using gas (air) as flow medium. Pressure drop vs flow rate data were used to evaluate friction factors in two parallel microchannels, namely MCP1 and MCP2 (1.0 mm deep x 0.240...

Extrusion is one of the widest used and the most basic processes of plastic forming, and the metal flow in extrusion is affected by many factors, such as friction, die shape, billet temperature and so on. Among these factors, friction is the key boundary condition to determine the property of the extruded products. In this paper research and measurements of velocity fields and impact of frictio...

designing and optimization of the intake manifold is one of the important steps in the development of the internal combustion engines. in this paper, the flow inside the intake manifold of an internal combustion engine is investigated by numerical modeling. the convective flux models are adopted to simulate the unsteady compressible flow behavior. to solve the governing equations, for calculati...

dependence on chemical fertilizer continually is increasing. continual increasing of using chemicalfertilizer causes nature pollution (e.g. water contamination). this has led researchers to aggressively investigate renewable fertilizer resources, biomass, to produce organic crops and reduced wastage. wormy compost is a bulk solid and biomass feed stocks. wormy compost flow is obstacle as it oft...