metal matrix composites have been widely used in industries, especially aerospace industries, due to their excellent engineering properties. however, it is difficult to machine them because of the hardness and abrasive nature of reinforcement elements like silicon carbide particles (sicp).in the present study, an attempt has been made to investigate the influence of spindle speed (n), feed rate...

Machining of titanium alloys is characterised by extremely rapid tool wear due to the high cutting temperature and the strong adhesion at the tool-chip and tool-workpiece interface, caused by the low thermal conductivity and high chemical reactivity of Ti alloys. With the aim to monitor the tool conditions during dry turning of Ti-6Al-4V alloy, a machine learning procedure based on the acquisit...

in manufacturing industry, it has been acknowledged that tool wear prediction has an important role in higher quality of products and acceptable efficiency. being an emerging area of research in recent years, drilling tool wear is an important factor which directly affects quality parameters of machined hole such as hole centring, roundness, burr formation and finished surface. in this paper, t...

Magnesium alloy AZ91D is used extensively in the automotive industry because of its high strength-to-weight ratio. Typically, components produced using are required to have good surface finish and contribute productivity but require long cutting times. Cryogenic cooling an environmentally friendly technology which has been proven improve tool life finish. This paper presents investigation on ef...

Monitoring the tool flank wear without affecting the throughput is considered as the prudent method in production technology. The examination has to be done without affecting the machining process. In this paper we proposed a novel work that is used to determine tool flank wear by observing the sound signals emitted during the turning process. The work-piece material we used here is steel and a...

In finish-machining, geometric accuracy and surface quality m adversely affected by the tool wear at the minor flank and nose area. This paper describes an investigation into "comprehensive" tool wear estimation, including flank-, crater-. minor flank-, and nose-wear, based on an analysis of dynamic cutting force in oblique machining. The force, measured in terms of its three orthogonal compone...

A model of the flank wear of cutting tools is developed by using linear control theory. The flank wear is assumed to consist of a mechanically activated and a thermally activated component. The wear process is mathematically treated as a feedback process, whereby the progressive wear raises the cutting forces and temperature thereby increasing the thermally activated wear-rate, and contributes ...

Haynes 25 alloy (also known as L-605 alloy) is cobalt based super alloy which has widely applications such as aerospace industry, turbine and furnace parts, power generators and heat exchangers and petroleum refining components due to its excellent characteristics. However, the workability of this alloy is more difficult compared to normal steels or even stainless. In present work, an experimen...

In this analysis, an attempt has been made to study the effects of included angle, hardness, rake angle, tool approach angle and nose radius of cutting inserts on flank wear with the surface roughness as constraint. The selected parameters are varied through three levels. A new parametric study without considering any kind of benchmark problems in this area is performed and methodology has been...

a high strength nickel chromium alloy (50cr-50ni-nb alloy), commonly referred to as in-657, is specifically used for components in furnaces which are fired by low grade fuel oils containing high levels of vanadium, sodium and sulphur. the purpose of this study is to experimentally investigatethe effect of machining parameters on machinability in turning of inconel 657. the considered parameters...