experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...

impulsive and convective frequencies are one of the most important subjects for evaluation of the seismic behavior of tanks. these two frequencies are defined by housner and used for obtaining rayleigh damping in time history analysis. aci 350 and nzsee standards have suggested some analytical solutions for finding convective and impulsive frequencies. these frequencies can also extract from mo...

In the present study, the non-linear response of RC frame using FE modeling under the incremental loading has been carried out in the first phase of analysis to study the response and load-carrying capacity of a four storeyed RC frame using non-linear finite element analysis. In the second phase of study an analysis model for retrofitted RC frame using finite element method using software ATENA...

A 3D finite element (FE) analysis technique using ABAQUS is chosen to explore the dynamic behavior of a beam under impact load. A beam, for which the impact dynamic test was conducted by Kishi (2004), is selected to develop a solid element FE model. FE analyses were performed implementing ABAQUS Explicit (2004) programming tool to predict the dynamic responses under the pressure amplitude intro...

Dynamic response analysis of mechanical structures is usually performed by adopting numerical/analytical models. Finite element (FE) modeling as a numerical approach plays an important role in dynamic response analysis of complex structures. The calculated dynamic responses from FE analysis are only reliable if accurate FE models are used. There are many elements in real mechanical structures w...

The performance of any finite element (FE) structural analysis is directly related to the global number of nodes and degrees of freedom (DOF) of the discretized structure and mesh distribution attributes. It is obvious that the appropriate numerical analysis needs finer elements in the zone of interest, e.g. zone of high stress concentration and intensity, and coarser elements for farther porti...

The finite-element (FE) method is widely recognized as a powerful tool in modeling structural and geotechnical systems and simulating their response to static and dynamic loads. In addition, numerical optimization is commonly used in many engineering applications, such as structural reliability analysis, FE model updating, structural identification, and structural optimization. This paper focus...

Impulsive and convective frequencies are one of the most important subjects for evaluation of the seismic behavior of tanks. These two frequencies are defined by Housner and used for obtaining Rayleigh damping in time history analysis. ACI 350 and NZSEE standards have suggested some analytical solutions for finding convective and impulsive frequencies. These frequencies can also extract from mo...