in this research, old magazine (omg) recycled fiber and glass fiber (gf) were mixed at different levels of 10%, 20%, 30% and 40% (based on weight) with two levels of 50% and 60% polypropylene (pp) and then the produced composites evaluated compared to those from net polypropylene. on the basis of obtained results from normalization equations in different treatments done, two treatments has been...

in this study, the effect of chemical modification of wood flour on the mechanical properties of polypropylene based composites was investigated using by dynamic mechanic thermal analysis. to meet this objective, the wood flour treated with chemical components including alkaline, acetic acid and benzoyl chloride, and then the chemically treated fibers were compounded with polypropylene at 180 °...

influences of the wood fiber acetylation as well as the compatibilizer mapp on water absorption, thickness swelling and dimensional stability of acetylated wood/ polypropylene composites (wpcs) were the main concerns of this research. wood fibers were acetylated with acetic anhydride without using any catalyst to achieve weight percent gains (wpgs) of 4.5, 7.5 and 17.6%. the acetylated fibers w...

hemicellulose of southern yellow pine wood spices was extracted by pressurized hot water at three different temperatures: 140°c, 155°c and 170°c. compounding with pp (polypropylene) was performed by extrusion after preparing wood flour and sieving to determine its mesh size. the ratio of wood to polymer was 50:50 based on oven-dry weight of wood flour. all extraction treatments and control samp...

Cementitious composites are one of the most consumed construction materials in the world. The use of cementitious composites is increasing due to their special characteristics. The behavior of high strength cementitious composites is improved by increasing the fiber percentage. In the present paper, the effects of steel microfibers and polypropylene fibers on mechanical properties and impact re...

Lignocellulose nanofibers were prepared by the wet disk milling of wood flour. First, an ethylene-butene copolymer was pre-compounded with wood flour or lignocellulose nanofibers to prepare master batches. This process involved evaporating the water of the lignocellulose nanofiber suspension during compounding with ethylene-butene copolymer by heating at 105 °C. These master batches were compou...

Maleic anhydride-modified polypropylene was compounded with commercially available surface-modified montmorillonite in a twin-screw extruder. Recompounding ensured the removal of visible tactoids from the extrudate but TEM and XRD techniques showed nonuniform dispersion of clay platelets. In this study, we investigated the mechanical and fracture properties of nanoclayfilled polypropylene. Emph...

This paper reports on the effect of fiber crimp frequency on sound absorption capability of staple polypropylene nonwoven batts. Stuffer box was used to impart crimp to spun tow. Crimping of the tow renders the fibers the required textile applicability. In this work, polypropylene batts composed of staple fibers with linear densities of 9, 14, and 18 denier were employed. Three crimp frequency ...

Alpha-grass was studied as the reinforcement in a starch-based polymer matrix. Mater-bi®-Y was chosen as a matrix due to its Young’s modulus, in line with that of polypropylene. The test specimens were injection molded and tensile tested. The obtained results were compared to glass fiber reinforced polypropylene. The reinforcing fibers increased the Young’s modulus significantly, obtaining valu...