sulfonated poly (ether ether ketone) (speek) with a low degree of sulfonation (ds = 40%) was prepared for proton exchange membrane fuel cells (pemfc). poly (ether ether ketone) (peek) was sulfonated in concentrated h2so4 under n2 atmosphere and characterized by the hydrogen nuclear magnetic resonance (h-nmr) technique. after preparation of the speek polymer, the obtained polymer was dissolved i...

in the current work, graphene oxide (go) samples were prepared at room temperature from graphite flakes using a modified hummer's method to produce metal-free electrocatalysts. the effect of the duration of the oxidation process on the structural, chemical and physical characteristics of the go samples was evaluated using x-ray diffraction (xrd), fourier transform infrared spectroscopy (ftir), ...

in present research work, homogeneous anion exchange membranes based on polysulfone (qapsfs) were prepared via chloromethylation, amination and alkalization. in amination step, trimethylamine and n,n,n',n'-tetramethyl-1,6-hexanediamine were used as amination and crosslinking agents, respectively. the chloromethylated polysulfone was characterized by 1hnmr spectroscopy and chloromethylation degr...

in this paper the role of super paramagnetic iron oxide nanoparticles (spi) on platinum nanoclusters on activated carbon (pt/c) for electrocatalytic oxygen reduction reaction was considered. four composites of pt/c and super paramagnetic iron oxide nanoparticles were prepared with the same total composites weight and different loading of pt/c (1.2, 0.6, 0.4 and 0.3 mg ). the composite attached ...

reduced graphene oxide film was synthesized on a glassy carbon electrode by electro reduction of graphene oxide powders in aqueous solution. then platinum nano particles were deposited on reduced graphene oxide film that was deposited on the glassy carbon electrode via electro reduction of platinum salt. the physical morphology of the platinum on reduced graphene oxide film was evaluated by sca...

Maximum Power Point (MPP) tracker has an important role in the performance of fuel cell (FC) systems improvement. Tow parameters which have effect on the Fuel cell output power are temperature and membrane water. So contents make the MPP change by with variations in each parameter. In this paper, a new maximum power point tracking (MPPT) method for Proton Exchange Membrane (PEM) fuel cell is pr...

The proton exchange membrane (PEMFC) fuel cell represents the energy of the future, in parallel with hydrogen. However, this technology must meet many technical challenges related to performance and durability before being sold on a large scale. It is well known that these challenges are closely linked to water management. This paper develops and implements a model of PEM fuel for simulation to...

modeling the heat and mass transport in micro channel is being used extensively in researches and industrial applications. the aim is optimizing fuel cell designs before building a prototype for engineering application. in this study, numerical, three-dimensional, single phase computational fluid dynamics model of a proton exchange membrane fuel cell with both the gas distribution flow channels...

output characteristics of fuel cells are affected by a large number of parameters such as geometry, dimensions, construction materials and conditions of supplying fluids. in this paper a mathematical model followed by a two-dimensional numerical approach has been presented to study the fuel cell parametrically. effect of oxygen concentration at gas diffusion layer entrance, temperature and pres...