There are various evaluation methods available for the discharge rate passing from the body of dam 1) Analytical methods, 2) Numerical methods and 3) Experimental methods. In the initial stages of dam design, it is necessary to approximately calculate the seepage and board of the project. In this research, almost 600 geometric models have been considered for embankment dam with clay core which ...

Dams have been always considered as the important infrastructures and their critical values are counted. Hence, evaluation and avoidance of dams’ destruction have a specific importance. Seepage occurrence in dams is an inevitable phenomenon. Despite all the progress in geotechnical engineering, up to now, seepage problem is the main conflict which occurs in dams. This study tried to estimate se...

it is correct control and monitoring of modern embankment dams that are very vital in the geotechniqual constructions. the improvement of methods of stability control, using the effective stress and the measurement of ganglionic water pressure in embankment dams cause more the safety for this kind of dams. nowedays there is such an idea that in stead of using of being safety factor against coas...

Abstract: The seepage control system of a high Concrete Face Rock-Fill Dam (CFRD) may have anti-seepage deficiencies during both construction and operation. In order to solve these, the three-dimensional Finite Element Method (FEM) model was built based on dam body filling, anti-seepage system, defect location and bedrock distribution. The seepage field simulation and computation were carried o...

the main role ofcore in earth dams is to reduce and control the seepage flow through the dam. in order to achieve this purpose, the core material is usually selected from pure or mixed clays.due to very small coefficient of permeability, the clay cores can prevent water leakageeasily. however, pore water pressures developed inside the core during construction, can not be dissipated quickly. as ...

The seepage and slope stability are very important and necessary in the dam dirt are, therefore, in this context, numerous applications to predict and calculate the rate of leakage has been prepared that than the experimental time and cost savings for the analysis of liquids before construction of earth dams need. In this study, safety factors for slope stability software Kaboodwal  plaxis two-...

Recently the design flows of many dams have been re-evaluated, resulting in spills often larger than the original ones. In many cases, occurrence of revised flows would result in dam overtopping because of insufficient storage and spillway capacity of reservoirs. Embankment dams whilst common are more likely to fail than other dam types when overtopped in an uncontrolled manner because of breac...

Stepped block protection has considerable potential as a low-cost method for the construction of chute spillways and the protection of embankments from erosion by overtopping flow. Stepped spillways are structurally stable, resistant to water loads and significantly increase the rate of energy dissipation on the spillway face thus eliminating or greatly reducing the need for a large energy diss...