the concentration of cu, mn, ni and zn were determined in tomatoes and onions samples using atomic absorption spectrometry. a total of 32 samples each of tomatoes and onions were collected from the exposed and control sites for analysis. the trace metals (cu, mn, ni and zn) concentration in tomatoes wee found to be 6.2406, 6.5521 , 5.7375 and 8.9297 mg/kg-1, respectively. while those of onions ...

In this paper, the effect of Ni on the formation of Cu6Sn5 and Cu3Sn intermetallics between tin and (Cu,Ni)-substrates has been studied by making use of the thermodynamic assessment of the Sn-Cu-Ni system. The driving forces for the diffusion of the elements in the intermetallic layers were calculated as a function of Ni-content. Assuming constant mobilities of component atoms, the results sugg...

The coupling effect of interfacial reactions between two pads in Ni-SnAg-Cu and Au/Ni/Cu-SnAg-Cu solder joints was investigated in this paper. After reflow soldering, a large amount of Cu can diffuse across the solder joint to the opposite pad to form (Cu,Ni)6Sn5 IMC on the Ni pad in Ni-SnAg-Cu solder joint. A little Ni can also be detected in Cu6Sn5 layer, which contains some trapped solder, o...

Standard enthalpies of formation of ternary phases in the Cu-Ni-Sn system were determined along sections at 25, 41 and 45.5 at.% Sn applying tin solution drop calorimetry. Generally, the interaction of Ni with Sn is much stronger than that of Cu with Sn. Along all sections the enthalpy of formation changes almost linearly with the mutual substitution of Cu and Ni within the respective homogenei...

Bagasse as a real biomass was converted to hydrogen rich gas via catalytic supercritical water gasification process. To find the effect of Cu on selectivity of products, Cu promoted Ni-γAl2O3 catalysts were prepared with 1 to 20wt% Ni and 0.5 to 10wt% Cu loadings via impregnation method. Catalysts were characterized by ICP, BET, XRD, H2 chemisorption and TEM technique as well CHNS analysis was ...

Miniaturization of electronic devices has led to the development of 3D IC packages which require ultra-small-scale interconnections. Such small interconnects can be completely converted into Cu-Sn based intermetallic compounds (IMCs) after reflow. In an effort to improve IMC based interconnects, an attempt is made to add Ni to Cu-Sn-based IMCs. Multilayer interconnects consisting of stacks of C...

measurement of availability and mobility of heavy metals in river sediments is required in order to understand the behavior of these metals and to prevent potential toxic hazards. leaching column experiments were conducted for four sediment samples to determine the degree of mobility and the distribution of zn, cd, ni, cu, and pb because of an application of spiked heavy metals in sediments. se...

ni-co/cu multilayers have been grown by electrodeposition method from a single electrolyte (based on ni(so4).6h2o, co(so4).7h2o, cu(so4) and h3bo3) using galvanostatic control on titanium sublayers. the x-ray diffraction (xrd) patterns confirmed the multilayered structure with the nanometer thicknesses. also, electron diffraction x-ray (edx)  analysis confirmed the purity of deposited samples. ...