background: the objective of this work was developing a simple and stable time-based on-line setup for assessing the potential of mercury (hg) vapor adsorption of the commercial sorbents used in air sampling and control operation followed by cold vapor atomic absorption spectrometry (cvaas). methods: a special designed separation chamber was used where reduction of the injected hg (ii) solution...

a facile and highly efficient method have been developed for the preconcentration of the mercury content in crude oil and gasoline samples after digestion with microwave-assisted digestion. octadecyl silica membrane disk has been modified by the recently synthesized triazene ligand, (e)-1-(2-ethoxyphenyl)-3-(4-nitrophenyl) triaz-1-ene (ent), then the modified membrane was used for the preconcen...

Multiwall carbon nanotubes, prepared by chemical vapor deposition, have an average diameter of 60-100 nm as shown by High Resolution Transmittance Electron Microscope, HR-TEM. The Multiwall carbon nanotubes (MWCNTs) were further characterized using X-ray Diffraction and Raman Spectroscopy. Mercury uptake capacity of MWCNTs was studied using batch adsorption method at different concentration ran...

A procedure is provided for the determination of mercury in animal tissue using a single unit stationary cold-vapor generator utilizing atomic absorption spectrophotometry. The entire reduction-absorption cell is fitted to the burner mount on the instrument. Sample digests are introduced into the sample compartment along with reductant, and background corrected absorbance is measured after thre...

2. Referenced Documents 2.1 ASTM Standards: D1318 Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method) D3237 Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy D3340 Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer D3605 Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy D3831 Test...

An immunoassay that detects mercuric ions in water at concentrations of 0.5 ppb and above is described. The assay utilizes a monoclonal antibody that binds specifically to mercuric ions immobilized in wells of microtiter plates. Within the range of 0.5-10 ppb mercury, the absorbance in the enzyme-linked immunosorbent assay (ELISA) is linear to the log of the mercuric ion concentration. The quan...

A sequential injection (SI) method for the determination of mercury via cold vapor atomic absorption spectrophotometry is presented. The method differs from flow injection (FI) cold vapor methods for the determination of mercury because of the simplicity of the system required for the method: one pump, one valve, a gas-liquid separator, and an atomic absorption spectrophotometer equipped with a...

This paper discusses a rapid and sensitive method developed to determine trace levels of mercury in natural water samples by cold vapor atomic absorption spectrometry using a preconcentration system composed by mini-column packed with 100 mg of 2-aminothiazol modified silica gel (SiAT) coupled on-line with the spectrometer’s cold vapor generator system. The optimum preconcentration conditions a...