recently, the al2o3–tio2–zro2 system has found valuable applications, particularly, as a support for nox storage–reduction (nsr) catalysts. nanocomposite powders were prepared from the co-precipitation method in inorganic precursors. the behaviors of mixed oxide nanoparticles under ultrasonic irradiation, such as dispersion, and crushing were studied. phase transformations, crystallite size, an...

in comparison to the previous researches, zro2 nanoparticles with higher surface area (85 m2/g) have been synthesized in this research. the as-prepared zro2 nanoparticles by co-precipitation method were characterized with x-ray diffraction (xrd), scanning electron microscopy (sem) and transmission electron microscopy (tem). the surface area of the sample was characterized by bet method. the eff...

thermoluminecsence (tl) characteristics of pure caso4 nanoparticles produced by co-precipitation method are presented. the formation of the nanoparticles was confirmed by x-ray diffraction (xrd) and scanning electron microscope (sem). tl glow curve of this phosphor, exposed to gamma radiation exhibits five overlapping glow peaks in the complex glow curve at 463, 470, 483, 498 and521(k) respecti...

iron oxide (fe2o3) is widely used as a catalyst, pigment and gas sensitive material.  in this article, α-fe2o3 nano-rods were first synthesized via a simple chemical method using iron(iii) nitrate 9- hydrate (fe(no3)3.9h2o) as precursor. xrd pattern showed that the iron oxide nanoparticles exhibited alpha-fe2o3 (hematite) structure in nanocrystals. the single-phase α- fe2o3 nano-rods were prepa...

nanocrystalline ceria has been considered as support for carbon monoxide preferentially oxidation. in this study ceria was prepared by precipitation method and the effects of preparation conditions, such as ph of solution (8-10), aging time (1-12 hr), drying temperature (80-120 °c), calcination time (2-6 hr) and temperature (400-600 °c) were investigated on ceria synthesized powders properties....

in this study, copper chromite (cucr2o4) nanoparticles was prepared by inverse co-precipitation method. in this method, cupric nitrate trihydrate, (cu (no3)2.3h2o) and chromium nitrate nonahydrate, (cr (no3) 3.9h2o) with a mole ratio of 1:2 were used. characterization of cucr2o4 nanoparticles was performed by fourier transform infrared spectroscopy (ft-ir), raman spectroscopy, x-ray diffraction...

in this work, mn ferrite nanopowders were prepared by co-precipitation method and were characterized. phase identification of the nanopowders was performed by x-ray diffraction method and the mean particle size of the nanopowders was calculated by scherrer's formula, using necessary corrections. magnetic parameters of the prepared nanopowders were measured by a vibrating sample magnetomete...

a facile and simple method was proposed to control the size and shape of the mgo nano structures with high surface area in the presence of efficient and cheap templates like peg 200, peg 600, peg 4000 and sorbitol at low temperature within a little time. nano rods and nanoparticles have been achieved by applying these templates and altering other growth parameters. the products were characteriz...

in the past decade, magnetic nanomaterials have attracted much attention due to their physical properties and technological applications. in this work, α-fe2o3 nanoparticles were first synthesized via a simple co-precipitation method using iron chloride hexahydrate (fecl3.6h2o) as precursor and ammonia solution as precipitator. the samples were then characterized by high resolution transmission...

cobalt chromite (cocr2o4) with normal spinel structure, shows catalytic activity for oxidation of unburned methane in the natural gas vehilcles (ngv). in this study, cocr2o4 nanoparticles were synthesized through a conventional co-precipitation technique and investigated for the catalytic combustion of methane. cobalt nitrate hexahydrate, chromium nitrate nonahydrate and ammonia solution (25%) ...