نتایج جستجو برای: ceramic matrix composites (cmcs)

تعداد نتایج: 424081  

2016
Longbiao Li

In this paper, the cyclic fatigue hysteresis loops of 2D woven SiC/SiC ceramic matrix composites (CMCs) at elevated temperatures in steam have been investigated. The interface slip between fibers and the matrix existing in matrix cracking modes 3 and 5, in which matrix cracking and interface debonding occurred in longitudinal yarns, is considered as the major reason for hysteresis loops of 2D w...

Journal: :international journal of advanced design and manufacturing technology 0
y.j. xu e. padayodi s. a. bahrani d. chamoret

to achieve an excellent thermal-mechanical performance of cmcs, it is necessary to analyze and design the thickness of the multi-layered interphases for an optimized trs distribution. an optimization was performed with a new version of the particle swarm optimization, the bsg-starcraft radius pso linked to a finite element software.

2004
Donglin Zhao Fen Gao Hongfeng Yin Fa Luo Wancheng Zhou

Ceramic matrix composites (CMCs) is one of the most promising candidates for high temperature structural material, in which SiC matrix exhibits an excellent oxidation resistance because of the formation of a protective layer of silica which limits further oxidation [1]. CMCs with continuous fibers exhibit attractive properties such as low densities, high elastic moduli, and high strengths at el...

2016
Longbiao Li

In this paper, comparisons of damage evolution between 2D C/SiC and SiC/SiC ceramic-matrix composites (CMCs) under tension-tension cyclic fatigue loading at room and elevated temperatures have been investigated. Fatigue hysteresis loops models considering multiple matrix cracking modes in 2D CMCs have been developed based on the damage mechanism of fiber sliding relative to the matrix in the in...

2015
John G. Weber

ANOMALY DETECTION AND MICROSTRUCTURE CHARACTERIZATION IN FIBER REINFORCED CERAMIC MATRIX COMPOSITES Name: Bricker, Stephen E. University of Dayton Advisor: Dr. Russell Hardie Ceramic matrix composites (CMCs) have the potential to replace current superalloys being used in hot components of jet engines. CMCs with continuous fiber reinforcement exhibit significant strength retention beyond tempera...

2016
Longbiao Li

In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...

2016
Longbiao Li

In this paper, the fatigue life of fiber-reinforced ceramic-matrix composites (CMCs) with different fiber preforms, i.e., unidirectional, cross-ply, 2D (two dimensional), 2.5D and 3D CMCs at room and elevated temperatures in air and oxidative environments, has been predicted using the micromechanics approach. An effective coefficient of the fiber volume fraction along the loading direction (ECF...

Journal: :Lubricants 2022

WC/Y–TZP–Al2O3 hybrid ceramic–matrix composites (CMCs) with dispersed Hadfield steel particles were sintered and then tested at sliding speeds in the range of 7–37 m/s contact pressure 5 MPa. Fast low-temperature sinter-forging allowed obtaining micron-sized WC grains, submicron-sized alumina-reinforced yttria partially stabilized polycrystalline tetragonal zirconia (Y–TZP–Al2O3), evenly distri...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید