background the use of shielding tools and x-ray beam collimator has extensively been advocated as effective methods to reduce radiation exposure to patients underwent radiological procedures. the aim of this study was to address the use of these protection measures during infant chest radiography. material and methods 348digital and/or analogue infant chest radiographs were reviewed that perfor...

background: in radiation therapy, the sparing of normal tissues can be performed using either multi-leaf collimators or cerrobend blocks. the current work focuses on the physical characteristics of cerrobend blocks including attenuation coefficient, effective penumbra width and isodose curves undulation in penumbral regions. materials and methods: all measurements were performed using a dual en...

Introduction: Collimating the primary beam to the area of diagnostic interest (ADI) has been strongly recommended as an effective method to reduce patient’s radiation dose and to improve image quality during radiology practice. Lack or inadequate collimation results in excessive radiation dose to patients and deterioration image quality.Objective: To assess the quality of beam collimation dur...

The high beam intensities in the next linear collider can damage the collimation system jaws if a failure of the electronic machine protection system allows the acceleration of a mis-launched pulse. We are developing a prototype collimator that will allow a new jaw surface to be moved into place after beam damage. We are also developing a prototype collimator based on continuously reforming the...

This note describes how beam collimation affects detector backgrounds at the collision point for the PEP-II Bfactory, a joint effort of three laboratories: LBNL, LLNL, and SLAC. Beam collimation controls the transverse size as well as the maximum allowed energy spread of the beam. The location of synchrotron radiation masks is determined by the transverse size of the beam in that the masks must...

We present a new conceptual and optical design for the Next Linear Collider post-linac collimation system. Energy collimation and passive protection against off-energy beams are achieved in a system with large horizontal dispersion and vertical betatron functions. Betatron collimation is performed in a relatively low-beta (FODO-like) lattice in which only thin spoilers intercept particles near ...

I studied experimentally the beam self-collimation and splitting in two-dimensional microwave photonic crystals. Using a microwave photonic crystal fabricated from alumina rods, I present an experimental proof of principle for an earlier theoretical proposal [A. Matthews et al., Opt. Commun. 279, 313 (2007)] of a photonic crystal beam splitter based on the self-collimation effect.

The four-dimensional transport of the transverse phase space of the extracted beam was calculated for the CAPRICE electron cyclotron resonance (ECR) ion source at GSI. The axial magnetic field adds an angular momentum to the extracted beam, resulting in a strongly x-y coupled beam. The report presents multi-particle tracking simulations, and the results illustrate that the beam brilliance can b...

This report describes studies performed in the framework of the Collimation Task Force organized to support the work of the second International Linear Collider Technical Review Committee. The post-linac beam-collimation systems in the TESLA, JLC/NLC and CLIC linear-collider designs are compared using the same computer code under the same assumptions. Their performance is quantified in terms of...

The post-linac energy collimation system of CLIC is designed to fulfil an essential function of protection of the Beam Delivery System (BDS) against miss-steered beams generated by failure modes in the main linac. Guaranteeing the collimator survivability in case of direct beam impact is very challenging, if we take into account the need to deal with an unprecedented transverse energy density p...