bainitic transformation at low transformation temperatures leads to a microstructure involving fine plates of bainitic ferrite and thin films of retained austenite. this microstructure has shown ultimate tensile strength of about 2.2 gpa, noticeable uniform elongation in the range of 5 to 30%, hardness values of about 600 to 670 hv and impact toughness in the range of 30 to 40 mpa m1/2. with ca...

Three low-carbon bainitic steels were designed to investigate the effects of Cr and Al addition on bainitic transformation, microstructures, and properties by metallographic method and dilatometry. The results show that compared with the base steel without Cr and Al addition, only Cr addition is effective for improving the strength of low-carbon bainitic steel by increasing the amount of bainit...

Recent studies on TRIP-assisted multiphase steels have emphasised the drastic importance of the bainitic transformation in the optimisation of properties. Bainitic ageing is necessary for the stabilisation of austenite with respect to the martensitic transformation. This metastable retained austenite can still transform to martensite when plastically deformed (TRIP effect). The present work dea...

In the present work the influence of vanadium on the hardenability and the bainitic transformation of a medium carbon steel is analyzed. While V in solid solution enhances the former, it hardly affects bainitic transformation. The results also reveal an unexpected result, an increase of the prior austenite grain size as the V content increases.

Copyright and Moral Rights for the articles on this site are retained by the individual authors and/or other copyright owners. For more information on Open Research Online's data policy on reuse of materials please consult the policies page. Abstract The effect of cobalt and aluminium on the austenite-to-pearlite transformation in a super-bainitic steel was investigated. The experimental work s...

In this study, thermal simulation experiments under different austenitization temperatures and different stress states were conducted. High-temperature laser scanning confocal microscopy (LSCM), thermal dilatometry, and scanning electron microscope (SEM) were used to quantitatively investigate the effects of the uniaxial compressive stress on bainitic transformation at 330 ̋C following differen...

We have performed in situ synchrotron X-ray diffraction experiments to assess the influence of aluminium and phosphorus on the austenite stability in low-alloyed transformation-induced plasticity steels during the high-temperature bainitic holding and the subsequent martensitic transformation during cooling to temperatures between room temperature and 100 K. Although the addition of aluminium i...

Low-temperature bainite, obtained by the transformation of austenite at temperatures as low as 200oC for times as large as several days, has been reported to have extraordinary mechanical properties including the highest reported hardness of any bainitic steel. The unusual properties are a consequence of the fine scale of the microstructure, which contains bainite plates with thickness in the r...

Some applications of phase transformation theory towards the exploitation of bainitic microstructures are discussed , with particular emphasis on the quantitative aspects of alloying element effects. Examples are used to illustrate the principles involved in the design of advanced bainitic alloys of the type currently under investigation in the steel industry.

The mechanism of the bainite transformation in carbon containing steels was discussed after presenting our recent experimental results; (1) the bainite transformation has its own C-curve, (2) incomplete phenomenon is a general feature of the bainite transformation, (3) bainitic fenite grows to a limited size, and (4) bainitic ferrite is highly supersaturated with respect to carbon. It was exami...