the aim of this work is to synthesize and investigate the performance of yttria-doped zirconia solgelcoatings in the chemical corrosion prevention of zircaloy-4 (zirconium alloy) in a 1 n h2so4environment. the influence of four different molar ratios of water to alkoxide, namely 1, 4, 12, and20, on the coating quality and its corrosion prevention performance was investigated. differentialtherma...

Yttria-stabilized zirconia (YSZ) is of interest to the aerospace community, notably for its application as a thermal barrier coating for turbine engine components. In such an application, diffusion of both oxygen ions and cations is of concern. Oxygen diffusion can lead to deterioration of a coated part, and often necessitates an environmental barrier coating. Cation diffusion in YSZ is much sl...

Functionally graded NiCoCrAlY/yttria-stabilized zirconia coatings were fabricated by plasma spraying using mechanically alloyed, plasma-spheroidized NiCoCrAlY/yttria-stabilized zirconia (YSZ) composite powders. Scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS) analysis revealed that oxidation of aluminum, chromium and yttrium in the NiCoCrAlY alloy occurred in th...

The Yttria stabilized Zirconia (YSZ) is a standard electrolyte for solid oxide fuel cells (SOFCs), which are potential candidates for next generation portable and mobile power sources. YSZ electrolyte thin films having a cubic single phase allow reducing the SOFC operating temperature without diminishing the electrochemical power density. Films of 8 mol% Yttria stabilized Zirconia (8YSZ) and fi...

Thermal Barrier Coatings are subjected to spallation and destabilization due to hot corrosion.Recently, Ceria Stabilized Zirconia (CSZ)-based TBCs have been intensively investigated for the YSZreplacement because CSZ has a much lower thermal conductivity and a higher expected thermalexpansion coefficient than those of YSZ. In this research, Yttria stabilized zirconia (YSZ) andceria stabilized z...

Yttria-stabilized zirconia (YSZ) has been used as a thermal/environmental barrier coating for gas turbine engine blades. Current methods of fabrication include air plasma spraying (APS) and electron-beam physical vapor deposition (EB-PVD). The APS technique results in a coating that loses effectiveness with thermal cycling. The EB-PVD technique deposits a columnar microstructure which accommoda...

Tribological coatings of yttria stabilized zirconia (YSZ), gold, diamond like carbon (DLC) and MoS2 were synthesized using magnetron assisted pulsed laser deposition (MSPLD). The coatings were synthesized in four-component and three-component combinations that included YSZ/Au/DLC/MoS2, YSZ/Au/MoS2, and YSZ/Au/DLC. A range of coating compositions was studied to explore coating optimization for l...

Bismuth oxide (Bi2O3)-doped yttria-stabilized zirconia (YSZ) were prepared via the solid state reaction method. X-ray diffraction and electron diffraction spectroscopy results indicate that doping with 2 mol% Bi2O3 and adding 10 mol% yttria result in a stable zirconia cubic phase. Adding Bi2O3 as a dopant increases the density of zirconia to above 96%, while reducing its normal sintering temper...

The hydrogen solubility in zirconia (yttria stabilized zirconia, YSZ) using a tritium imaging plate (IP) technique has been measured in a temperature region ranging from 673K to 973K. The tritium distribution in the zirconia specimens was nearly uniform suggesting an equilibrated dissolution. The hydrogen solubility in specimens were rather low (around ppm or below) and showed Arrhenius type te...