the aim of this work is to synthesize and investigate the performance of yttria-doped zirconia solgelcoatings in the chemical corrosion prevention of zircaloy-4 (zirconium alloy) in a 1 n h2so4environment. the influence of four different molar ratios of water to alkoxide, namely 1, 4, 12, and20, on the coating quality and its corrosion prevention performance was investigated. differentialtherma...

The aim of this work is to synthesize and investigate the performance of yttria-doped zirconia solgel coatings in the chemical corrosion prevention of zircaloy-4 (zirconium alloy) in a 1 N H2SO4 environment. The influence of four different molar ratios of water to alkoxide, namely 1, 4, 12, and 20, on the coating quality and its corrosion prevention performance was investigated. Differential th...

Enhanced grain growth in ultra-thin yttria-doped-zirconia (YDZ) films synthesized under ultraviolet (UV) irradiation is reported. The mean grain size in UV-activated 7.5 mol % yttria doped zirconia films nearly 56 nm thick increased to 85 nm upon annealing in an oxygen-rich ambient at 900 C for one hour, while in thermally grown YDZ they grew only to ~15 nm under identical annealing conditions....

Bismuth oxide (Bi2O3)-doped yttria-stabilized zirconia (YSZ) were prepared via the solid state reaction method. X-ray diffraction and electron diffraction spectroscopy results indicate that doping with 2 mol% Bi2O3 and adding 10 mol% yttria result in a stable zirconia cubic phase. Adding Bi2O3 as a dopant increases the density of zirconia to above 96%, while reducing its normal sintering temper...

Functionally graded NiCoCrAlY/yttria-stabilized zirconia coatings were fabricated by plasma spraying using mechanically alloyed, plasma-spheroidized NiCoCrAlY/yttria-stabilized zirconia (YSZ) composite powders. Scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS) analysis revealed that oxidation of aluminum, chromium and yttrium in the NiCoCrAlY alloy occurred in th...

In this study we report on the development and operational data of a metal-supported solid oxide fuel cell with a thin film electrolyte under varying conditions. The metal-ceramic structure was developed for a mobile auxiliary power unit and offers power densities of 1 W/cm² at 800 °C, as well as robustness under mechanical, thermal and chemical stresses. A dense and thin yttria-doped zirconia ...

The purpose of this paper is to examine the piston stress distribution using several thicknesses of the coating materials to achieve higher gasoline engine performance. First of all, finite element structure analysis is used to uncoated petrol piston made of aluminum alloy. Then, steel and cast iron piston materials are conducted and compared with the aluminum piston. After that, investigation ...

This paper deals with the morphology, constitutive phases and fine microstructures of some EBPVD processed yttria partially stabilized zirconia thermal barrier coatings. This study has been performed by X-ray diffraction and scanning and transmission electron microscopy. It was shown that the coatings studied were constituted of a single metastable tetragonal t' phase, as expected if one refers...

The conductivity of a thermal-barrier coating composed of atmospheric plasma sprayed 8 mass percent yttria partially stabilized zirconia has been measured. This coating was sprayed on a substrate of 410 stainless steel. An absolute, steady-state measurement method was used to measure thermal conductivity from 400 to 800 K. The thermal conductivity of the coating is 0.62 W/(m⋅K). This measuremen...

Porous yttria-stabilised zirconia ceramics have been gaining popularity throughout the years in various fields, such as energy, environment, medicine, etc. Although yttria-stabilised zirconia is a well-studied material, voided yttria-stabilised zirconia powder particles have not been demonstrated yet, and might play an important role in future technology developments. A sol-gel synthesis accomp...