Harmful elements (Pb, Se, Cd, etc.) in the soil samples were measured by X-ray fluorescence (XRF) method. We investigated the influence of the thickness of soil layer, the grain size of soils, and the water content in soils on XRF intensity. Since high-energy XRF such as Cd K was detected in deep inside of soils, a thickness of 10 mm was recommended. The soil sample with a small grain size gave...

Micro-XRF is a significant tool for the analysis of small regions. A micro-X-ray beam can be created in the laboratory by various focusing X-ray optics. Previously, nondestructive 3D-XRF analysis had not been easy because of the high penetration of fluorescent X-rays emitted into the sample. A recently developed confocal micro-XRF technique combined with polycapillary X-ray lenses enables depth...

The stability of Hg in an acrylonitrile-butadiene-styrene disk certified reference material (ABS disk CRM, NMIJ CRM 8116-a) during measurements by wavelength dispersion X-ray fluorescence (WD-XRF) analysis was evaluated in this study. The XRF intensities of Hg (L(α)) and Pb (L(α)) as well as the XRF intensity ratios of Hg (L(α))/Pb (L(α)) observed under different X-ray tube current conditions a...

The same sherd was analyzed using a scanning electron microscope with energy dispersive spectroscopy (SEM-EDS) and a micro X-ray fluorescence tube attached to a scanning electron microscope (Micro-XRF-SEM) to compare the effectiveness of elemental detection of iron-based pigment. To enhance SEM-EDS mapping, the sherd was carbon coated. The carbon coating was not required to produce Micro-XRF-SE...

X-ray fluorescence (XRF) spectrometry has been used by the oil industry since the 1950s. XRF can be found supporting activities in exploration, production, research as well as intellectual properties. Traditional applications for XRF were the analysis of single element or a limited range of multiple elements. Today, XRF encompasses high precision full spectral elemental profiles along with high...

The purposes of this study are: (1) to determine whether proficiency analytical test (PAT) materials from the American Industrial Hygiene Association can be used to provide quality data for portable X-ray fluorescence analysis (XRF) of lead in dust wipe surface samples; (2) to provide data to determine whether the on-site analysis of field dust wipe samples by XRF and the laboratory method of i...

Micro-XRF analysis provides us with elemental maps, which are very useful for understanding the samples under test. Usually, scanning-type elemental mapping is performed. That means, a sample stage is scanned to a fixed X-ray micro beam. XRF analysis is performed at the scanned points, leading to 2D elemental mapping. One of the drawbacks of this technique is the long acquisition time depending...

Micro-X-ray fluorescence (micro-XRF) analysis is a promising method for determining elemental distributions of small regions. Moreover, a recent trend in micro-XRF is 3D elemental analysis by using confocal micro-XRF instruments combined with two polycapillary x-ray lenses. Our research group has been developed confocal micro-XRF instruments by using polycapillary x-ray lenses, and its spatial ...

Measurements of the refractive index (RI) and elemental analysis using synchrotron radiation X-ray fluorescence spectrometry (SR-XRF) were applied to the forensic discrimination of sheet-glass samples from different origins. The refractive index was calculated from the matching temperature at which the glass fragments became invisible in silicone oil. Fragments smaller than 1 mm in maximum diam...

Grazing-exit x-ray fluorescence (GE-XRF) and micro x-ray fluorescence (micro-XRF) methods were applied to chemical microchips as a detection method. Since an energy-dispersive x-ray detector was used, the simultaneous detection of multiple elements was possible. An analyzing region was especially designed on the microchip so that a sample solution could be dried and concentrated in a suitable a...