It might be assumed that increasing the thickness of a glove would reduce the vibration transmitted to the hand. Three material samples from an anti-vibration glove were stacked to produce three thicknesses: 6.4, 12.8 and 19.2 mm. The dynamic stiffnesses of all three thicknesses, the apparent mass at the palm and the finger and the transmission of vibration to the palm and finger were measured....

This paper presents a numerical model for the calculation of the transmission loss of a panel with an array of tuned vibration absorbers attached. The transmission loss of the panel is calculated for the case of the bare panel, with tuned vibration absorbers attached, and equivalent blocking masses. The theoretical predictions of transmission loss are compared with experimental measurements.

The main objective of this research work is to find the natural frequency and mode shape of truck transmission housing. Truck transmission housing or gearbox transmission casing is subjected to vibration induced by the excitation forces transmitted to the casing through bearings. So it is required to find the natural frequency for the accurate prediction of housing life and prevent it from frac...

There are numerous proposals for whole body tactile displays that aim to improve the sense of immersion in audio contents. However, these devices commonly have problems, such as long setup times due to numerous actuators, and user confinement to the system. To address these issues, we proposed to present the vibration to a wide area of the body via bone conduction. In this paper, we first inves...

This paper is a survey of the literature on gear noise and vibration. It is divided into three parts, “Transmission error”, “Dynamic models” and “Noise and vibration measurement”. Transmission error (TE) is considered to be an important excitation mechanism for gear noise and vibration. The definition of transmission error is “The difference between the actual position of the output gear and th...

Chain saws were first used in Kyusyu in 1956 for cutting down trees and sawing timber in the national forests. In 1961, some workers complained of symptoms due to the vibrations, but countermeasures were not taken until later. The working system and payment system in those times were different from the systems, today. The magnitudes of the chain saw vibrations were very large and the chain saws...

Supine human response and vibration-suppression during whole-body vibration." MS (Master of Science) thesis, ii ACKNOWLEDGMENTS I would like to acknowledge the U.S. Army Aberdeen Test Center (ATC) for the use of the inertial sensors, the USA Army Research Lab (USAARL) for providing the litter, Dr. David Wilder for providing the long spinal board and cervical collar, Mr. Jonathan DeShaw for assi...

The design codes of building are mainly related to the strength of the building and there are no specific codes for the design of building with waffle floors for vibration sensitive equipment. The finite element model, ANSYS, is capable to consider the effects of floor thickness, the size of the bays and stiffness of the columns for analyzing the vibration of the waffle floors and vibration tra...

Because of increasingly common damage and thefts of the transmission towers, a new function is proposed to enhance the state maintenance of transmission lines. It relies on the monitoring of the high-voltage transmission towers to ensure the reliability and safety of the power grid operation. An approach which combines Independent Component Analysis (ICA) with neural network based on Particle S...