For the first time photopolymerisation of polymer monoliths has been realised with UV-light emitting diodes (LEDs) as light source and demonstrated with polymethacrylate monoliths created in fused silica capillaries and plastic chips.

UV cured epoxy systems represent complementary technology to the established heat cured epoxy systems for coating, adhesion and encapsulation of electronic devices. The UV cured epoxy systems offer significant benefits in terms of fast cure and thus very short production cycle time; low stress and better colour due to room temperature cure; process wise no mix ratio problem or anhydride handlin...

This paper examines the effects of some key operating parameters of UV sources on the curing of various UV inks, coatings and adhesives. The effects of peak UV wavelength and peak intensity are quantitatively evaluated using FT-IR. The data are helpful in guiding both formulators, raw material suppliers and end users to better understand the impact of the UV sources, especially UV LED sources, ...

A direct outcome of the exponential growth of macromolecular crystallography is the continuously increasing demand for synchrotron beam time, both from academic and industrial users. As more and more projects entail screening a profusion of sample crystals, fully automated procedures at every level of the experiments are being implemented at all synchrotron facilities. One of the major obstacle...

Te ch ni ca l P ap er UV-LED Overview Part II — Curing Systems By Jennifer Heathcote This article is the second installment in a three-part series designed to consolidate key principles and technical information regarding the science and engineering behind ultraviolet light-emitting diodes (UV-LEDs). If you have not yet read “Part I— Operation and Measurement” in the July/August 2010 issue, you...

Ultraviolet light emitting diodes (UV-LEDs) have attracted great interest in recent years. They can be used to polymerize coatings, such as those used for prefinished wood flooring. In this project, two lamps were compared for their suitability to be used on a wood flooring finishing line: a UV-microwave and a UV-LED lamp. Low heat emission was found for the UV-LED lamp compared to the UV-micro...