one of the most prominent industries is bending, while using rotary draw bending method is known to be the most conventional approach for thin wall tube bending. pressure die is one effective tool which boosts the tube during the process and eventually improves the bending quality. other effective parameters are mandrel and the amount of clearance between tube and mandrel. in the present study,...

In this paper, the laser bending process of a circular tube made of mild steel has been investigated experimentally. For this purpose, the effects of the irradiating length and the number of irradiating passes on the main bending angle of a laser bent tube are studied. In addition, the main defects of the laser tube bending process such as lateral bending angle, ovality and thickness variation ...

Laser tube bending is a flexible forming process. Two irradiation methods of axial and circumferential scanning are generally used to form metal tubes. The two most important disadvantages of circumferential scanning are its lower bending angle and the time interval required between each scan for cooling purpose. In this research, a novel cooling strategy during laser tube bending with circumfe...

Thin-walled tube bending is still to be considered a new and advanced technique. The process has been adopted into several industries such as aero and automotive. This process may produce a wrinkling, bulking and tearing phenomenon if the process parameters are inappropriate, especially for tubes with large diameter and thin wall thickness. Push bending process is one of the methods used for be...

Thin-walled tube bending has common applications in the automobile and aerospace industries. The rotary-draw-bending method is a complex physical process with multi-factor interactive effects and is one of the advanced tube forming processes with high efficiency, high forming precision, low consumption and good flexibility for bending angle changes. However, it may cause a wrinkling phenomenon,...

Abstract—Rotary draw bending is a method which is being used in tube forming. In the tube bending process, the neutral axis moves towards the inner arc and the wall thickness distribution changes for tube’s cross section. Thinning takes place in the outer arc of the tube (extrados) due to the stretching of the material, whereas thickening occurs in the inner arc of the tube (intrados) due to th...

Neural tube closure is a fundamental embryonic event whose molecular regulation is poorly understood. As mouse neurulation progresses along the spinal axis, there is a shift from midline neural plate bending to dorsolateral bending. Here, we show that midline bending is not essential for spinal closure since, in its absence, the neural tube can close by a 'default' mechanism involving dorsolate...

The Rotary-Draw Bending (RDB) process is a distinguished process employed for the precision cold bending of a hollow tube with small radius bends using Numerical Control (NC) machines. This research presents an analytical model based on the power law hardening model for the RDB processing of rectangular thin tubes. Based on the constraints of the tube in the dies and its thinness, the plane str...

The aim is to present our new method of compression, a compression tube instead of conventional compression screw and to investigate the difference of proximal locking screw bending resistance between compression screw application (6 mm wide contact) and compression tube (two contact points with 13 mm gap) application. We formed six groups each consisting of 10 proximal locking screws. On metal...

Aluminum and magnesium alloys are of materials for decreasing vehicle weight and consequently reducing fuel consumption. However, forming limitations regarding their low formability at room temperature are found when being manufactured by conventional forming processes. For this reason, development of new forming techniques, such as warm tube hydroforming, is needed to overcome such limitations...