this paper presents a method for diagnosis of eccentricity fault in a switched-reluctance motor (srm) during offline and standstill modes. in this method, the fault signature is differential induced voltage (div) achieved by injecting diagnostic pulses to the motor windings. it will be demonstrated by means of results that there is a correlation between differential induced voltage and eccentri...

in this study, the analysis of transient thermoelastic response of a functionally graded (fg) non-axisymmetric viscoelastic cylinder is presented. the material properties are assumed to be time- dependent and radially and circumferentially non-homogeneous. the finite element (fe) formulations of the thermoelastic problem are obtained using the virtual work method and all the coupling terms are ...

We present a systematic method for developing low order nonlinear models from physically based, large scale finite element models of rapid thermal processing (RTP) systems. These low order models are extracted from transient results of a detailed finite element model using the proper orthogonal decomposition (POD) method. Eigenfunctions obtained from the POD method are then used as basis functi...

in this paper, a three-dimensional finite element model has been developed to simulate the laser-tig hybrid welding (hlaw) of stainless steel 1.4418 with thickness of 4 mm. transient temperature profile and dimensions of the fusion zone and heat affected zone (haz) during welding process are calculatedusing finite element method (fem) and were solved in the abaqus/standard software.the heat sou...

dynamic analysis of two-dimensional elasticity problems using the isogeometric analysis method and its comparison with the finite element method is the subject of this research. for this purpose, formulation of the governing differential equation is obtained by using the b-spline basis functions. some numerical examples employing consistent and lumped mass matrices are presented in order to com...

Considering the fact that a large volume of iron reserve in the Sechahoon Iron Mine in Yazd Province has located under the water table, it is necessary to conduct a comprehensive study on water flow within the pit and its surroundings. The conceptual model of the aquifer was created using surface and underground geological information compared with water table data of the area of interest. In t...