in recent years, the effects of heterogeneous catalysts for the oxidation of organic and inorganic pollutants in industrial wastewaters are spread. traditionally, these reactions are usually carried out using suspensions of photo-catalysts such as tio2. a chemical method including ticl4, al(no3)3, ethanol amine, ethyl acetoacetate and aqueous ammonia were used for the fabrication of tio2-al2o3 ...

In recent years, the effects of heterogeneous catalysts for the oxidation of organic and inorganic pollutants in industrial wastewaters are spread. Traditionally, these reactions are usually carried out using suspensions of photo-catalysts such as TiO2. A chemical method including TiCl4, Al(NO3)3, ethanol amine, ethyl acetoacetate and aqueous ammonia were used for the fabrication of TiO2-Al2O3 ...

Photocatalytic ceramic membranes have attracted considerable attention for industrial wastewater treatment. However, morphological control of the membrane surface to improve its photocatalytic reactivity for the degradation of organic pollutants remains a challenge. Herein, we report a new nanostructured TiO2/Al2O3 composite ceramic membrane prepared from a poly(oxyethylene methacrylate) (POEM)...

Abstract: Nano-structural synthesized materials can be fabricated utilizing intensive milling after combustion synthesis. The Al2O3-TiB2 ceramic composite has been synthesized by aluminothermic reactions between Al, Ti (TiO2), and B (B2O3 or H3BO3). Boric acid (H3BO3) is less expensive than boron oxide, and after being dehydrated at 200°C, boron oxide will be obtained. In this study, Al, TiO2, ...

ticl4, ammonia, inorganic salts as raw material, nanometer composite-crystal tio2 powders were synthesized by two-step chemical method. precursors were crystallized with different phase and stable composite-crystal tio2 with anatase and rutile phase was prepared at low temperature. quantitative control of crystal phase was realized. remarkable factors including reaction ph value, reaction time,...

The corrosion resistant coatings used conventionally are susceptible to degradation, leading to pitting corrosion. This report summarizes the corrosion resistant nature of thin films of Cu-TiO2 coated on mild steel, in different corrosion environments. Nano meter thick (100nm, 125nm, 150nm) composite coatings were coated on steel substrate by RF magnetron sputtering technique. The required targ...

A nanocomposite containing polypropylene (PP) and nano α-Al2O3 particles was prepared using a Haake internal mixer. Mechanical tests, such as tensile and flexural tests, showed that mechanical properties of the composite were enhanced by addition of nano α-Al2O3 particles and dispersant agent to the polymer. Tensile strength was approximately ∼ 16% higher than pure PP by increasing the nano α-A...

The present study aims at developing A356/Al2O3(np) nano-composite with a novel and cost effective method for attaining homogeneous dispersion of Al2O3 nanoparticles in the Al matrix. In the current research, Al micro powders distributed on aluminum foil and then Al2O3 nanoparticles ultra-sounded in ethanol and sprayed on Al substrate. Subsequently, the sandwich foil was added to molten A356 du...