TiO2-doped SnO2 nanopowder is synthesized via a sol-gel method and characterized by atomic force microscopy and X-ray diffraction. Using this nanopowder, we have fabricated a novel semiconductor gas sensor that is sensitive to UV light illumination. We find that gas-sensing properties of TiO2-doped SnO2 sensor can be enhanced significantly under the exposure of UV light. The sensor exhibits a h...

In this study, the commercial TiO2 nanopowder and micropowder of anatase phase and rutile phase have been characterized by x-ray diffraction (XRD) and transmission electron microscopy (TEM). XRD patterns of nano-TiO2 in rutile and anatase phases exhibit broad peaks whereas both phases of micro-TiO2 demonstrate very sharp peaks. TEM images show that the grain size of TiO2 micropowders and TiO2 n...

TiO2—methylcellulose (MC) nanocomposite films processed by the sol-gel technique were studied for phocatalytic applications. Precalcined TiO2 nanopowder was mixed with a sol and heat treated. The sol suspension was prepared by first adding titanium tetra isopropoxide (Ti(OPr)4 or TTP) to a mixture of ethanol and HCl (molar ratio TTP:HCl:EtOH:H2O = 1:1.1:10:10) and then adding a 2 wt.% solution ...

The use of nanoparticles (NPs) has become a significant area of research in Dentistry. Objective The aim of this study was to investigate the physical, antibacterial activity and bond strength properties of conventional base, core build and restorative of glass ionomer cement (GIC) compared to GIC supplemented with titanium dioxide (TiO2) nanopowder at 3% and 5% (w/w). Material and Methods Vick...

Synthesis of TiO2 nanopowder via a low cost ultrasonic spray pyrolysis technique is reported and the nanopowder is used for the surface modification of glassy carbon electrode. The structural characterization of nanopowder by high temperature XRD clearly shows the phase transformation from anatase to rutile phase on increasing temperature. The morphological structure is characterized by field e...

MWCNTs/TiO2 nanocomposite was prepared by oxidising MWCNT in H2SO4/HNO3 then decorating it with TiO2-p25 nanopowder. The composites were characterised using XRD, TEM, FT-IR PL and UV-vis spectroscopy. The TEM images have shown TiO2 nanoparticles immobilised onto the sidewalls of the MWCNTs. The UV-vis spectrum confirms that the nanocomposites can significantly absorb more light in the visible r...

TiO2 nanopowder is prepared by simple sol-gel method using starting material as titanium isopropoxide with methanol and annealed at 600°C, 700°C and 800°C for 1 hour in air. X-ray diffraction pattern revealed the presence of both anatase and rutile phase in TiO2 specimens annealed at different temperatures. It is observed that the content of rutile phase and crystallite size increases with incr...

Single crystalline tin oxide (SnO2) nanowires have been synthesized by carbothermal reduction of SnO2 nanopowder followed by thermal evaporation of the reduced precursor and growth via the vapor-liquid-solid (VLS) growth mechanism. The nanowires are deposited on single crystalline TiO2 substrates of orientations of (100) and (110) that are coated with a thin film and colloids of gold (Au) catal...

In this paper, 2wt.% Fe doped TiO2 nanopowder was prepared by a combination of sol-gel and mechanical alloying methods. The mechanical alloying of Fe powder with Ti(OH)4 gel produced from the sol-gel method was used to produce Fe doped TiO2 nanopowder. The synthesized samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and diffuse reflectan...

An np-Si microwire array coupled with a two-layer catalyst film consisting of Ni–Mo nanopowder and TiO2 light-scattering nanoparticles has been used to simultaneously achieve high fill factors and lightlimited photocurrent densities from photocathodes that produce H2(g) directly from sunlight and water. The TiO2 layer scattered light back into the Si microwire array, while optically obscuring t...