electro-thermo-elastic stress analysis of piezoelectric polymeric thick-walled cylinder reinforced by boronnitride nanotubes (bnnts) subjected to electro-thermo-mechanical fields is presented in this article. the electro-thermo-elastic properties of piezoelectric fiber reinforced composite (pefrc) was studied by a modified xy micromechanical model capable of exhibiting full coupling relation be...

Electro-thermo-elastic stress analysis of piezoelectric polymeric thick-walled cylinder reinforced by boronnitride nanotubes (BNNTs) subjected to electro-thermo-mechanical fields is presented in this article. The electro-thermo-elastic properties of piezoelectric fiber reinforced composite (PEFRC) was studied by a modified XY micromechanical model capable of exhibiting full coupling relati...

Dense Silicon nitride was investigated to determine the effect of its microstructural parameters and densification on thermo-mechanical properties and thermal stress resistance to fracture initiation during a hot or cold mechanical and thermal shock testing. The different materials and microstructures were obtained by changing the parameters such as the type of the powder, additive, forming p...

S. Krum, F. Pešlová, Czech Technical University in Prague, Faculty of Mechanical Engineering Prague, Czech Republic, J. Kliber VŠB TU Ostrava, Czech Republic Corrosion resistant steels are used for the prod uction of parts exposed to corrosive environment and also to thermo-mechanical loads. Steel molds in the glass manufacture industry with their functional surfaces simultaneously exposed to t...

Dense Silicon nitride was investigated to determine the effect of its microstructural parameters and densification on thermo-mechanical properties and thermal stress resistance to fracture initiation during a hot or cold mechanical and thermal shock testing. The different materials and microstructures were obtained by changing the parameters such as the type of the powder, additive, forming p...

in this paper, an ultra low carbon high strength low alloy grade steel was subjected to a two-step forging processand this was followed by different post cooling methods. the highest strength was obtained at a faster coolingrate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides andcarbonitrides. at a slow cooling rate, the strength fel...

using  principle  of  minimum  total  potential  energy  approach  in conjunction  with  rayleigh-ritz  method,  the  electro-thermo-mechanical  axial  buckling  behavior  of  piezoelectric  polymeric cylindrical  shell  reinforced  with  double-walled  boron-nitride nanotube  (dwbnnt)  is  investigated. coupling  between  electrical and mechanical  fields  are  considered  according  to  a  re...

mechanical stress and maximum superconducting current have been calculated for a superconductor subjected to uniform plastic deformation. The training effect due to strain hardening o f the material is discussed. These results are compared with an analogous case when the normal transition is caused by the thermo-magnetomechanical instability. The quenching current is shown to depend on the hist...

Using principle of minimum total potential energy approach in conjunction with Rayleigh-Ritz method, the electro-thermo-mechanical axial buckling behavior of piezoelectric polymeric cylindrical shell reinforced with double-walled boron-nitride nanotube (DWBNNT) is investigated. Coupling between electrical and mechanical fields are considered according to a representative volume element (RVE)-ba...

OBJECTIVES The purpose of present study was to evaluate the internal adaptation of composite restorations using different adhesive systems. MATERIALS AND METHODS Typical class I cavities were prepared in 32 human third molars. The teeth were divided into the following four groups: 3-step etch-and-rinse, 2-step etch-and-rinse, 2-step self-etch and 1-step self-etch system were used. After the d...