in this paper, an ultra low carbon high strength low alloy grade steel was subjected to a two-step forging processand this was followed by different post cooling methods. the highest strength was obtained at a faster coolingrate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides andcarbonitrides. at a slow cooling rate, the strength fel...

mechanical stress and maximum superconducting current have been calculated for a superconductor subjected to uniform plastic deformation. The training effect due to strain hardening o f the material is discussed. These results are compared with an analogous case when the normal transition is caused by the thermo-magnetomechanical instability. The quenching current is shown to depend on the hist...

This paper presents an analytical solution for response of a piezoelectric hollow cylinder under two-dimensional electro thermo mechanical fields. The solution is based on a direct method and the Navier equations were solved using the complex Fourier series. The advantage of this method is its generality and from mathematical point of view, any type of the thermo mechanical and electrical bound...

the phase transformation phenomenon due to the crystallographic change of shape memory alloys subjected to mechanical or thermal loading is very complicated. regarding the thermo-mechanical coupling effects in shape memory alloys, in case of high  loading rates, heat generation/absorption during the forward/reverse transformation, will lead in temperature-dependent variation and consequently af...

resistance spot welding is an important manufacturing process in the automotive industry for assembling bodies. the quality and strength of the welds and, by extension, the body is mainly defined by the quality of the weld nuggets. the most effective parameters in this process are sheet material, geometry of electrodes, electrode force, current intensity, welding time and sheet thickness. the p...

The defect in work rolls directly influence the forming cost and the final shape of the product. The researchers tend to investigate the thermo-mechanical stress in work roll of rolling machines. These stresses may reduce the roll life. Since the investigation of the thermo-mechanical stress in work roll with real-conditions is complex, comprehensive studies by means of numerical methods are av...

this paper presents theoretical and numerical state-of-the-art information in the field of hygro-thermo-mechanical deformation simulation in structural concrete. the aspects discussed include coupled hygro-thermo-mechanical performance of porous materials including concrete, multi-scale simulation of concrete properties especially the volumetric and structural deformation performance, and the m...

Employing the Ginzburg-Landau phase-field theory, a new coupled dynamic thermo-mechanical 3D model has been proposed for modeling the cubic-to-tetragonal martensitic transformations in shape memory alloy (SMA) nanostructures. The stress-induced phase transformations and thermo-mechanical behavior of nanostructured SMAs have been investigated. The mechanical and thermal hysteresis phenomena, loc...

hot rolling of a large ring of titanium alloy (lrt) is a highly nonlinear incremental forming process with coupled mechanical and thermal behaviors (mtbs) which significantly affect microstructure and properties of the ring. the feed rate of idle roll and the rotational speed of driver roll have major effects on ovality of the ring. in this paper, the effects of these parameters on the ovality ...

In this paper, the effect of various parameters on out-of-phase thermo-mechanical fatigue (OP-TMF) lifetime of A356.0 cast aluminum alloy is investigated. The studied parameters include maximum temperature, dwell time, and the thermo-mechanical loading factor. OP-TMF tests are conducted considering realistic running conditions of diesel engine cylinder heads. The maximum temperature varies betw...