As a necessary component, regenerator plays an important role in the refrigeration performance of the pulse tube refrigerator. The objective of this research is to investigate the flow characteristics in a porous regenerator of the pulse tube refrigerators, subjected to oscillating flow. The hydrodynamic and thermal behavior of the regenerator is investigated by considering porous media approac...

In a travelling wave thermoacoustic device, the regenerator sandwiched between a pair of (hot and cold) heat exchangers constitutes the so-called thermoacoustic core, where the thermoacoustic energy conversion from heat to acoustic power takes place. The temperature gradient along the regenerator caused by the two heat exchangers excites and maintains the acoustic wave in the resonator. The dev...

The regenerator glass-ceramic is produced as a honeycomb product for a turbine engine heat exchanger. It is made from a powdered glass frit, which as a slurry can impregnate paper that is wound as alternately corrugated sheets on a wheel. After firing, a porous ceramic regenerator wheel is produced that allows energy to be transferred from hot exhaust gases to the cold intake air in the turbine...

correlation of heat transfer coefficients for air flow through the regenerator constructed from randomly paked spheres is reported for the symmetric-balanced mode of operation. the experimental results have been correlated by the least square regression has been obtained.the present correlation has been compared with the heat transfer coefficient correlations in the literature.

Introduction A number of experimental realizations of thermo-acoustic engines that use an acoustic loop to feed energy back to a regenerator have been reported, mostly of the Thermo-Acoustic Stirling Heat Engine (TASHE) type. An alternative configuration is the simple wavelength loop with the linear alternator in a short side-branch, but with close to travelling-wave phasing on both sides of it...

In this paper, numerical solution of beta-type Stirling engine was presented considering its non-ideal regenerator. To this end, the second-order model including heat and power losses was used. Then, a numerical code was applied for calculating geometrical and physical optimum values of the engine. To confirm the obtained results, the physical and geometrical parameters of the GPU-3 engine were...

A stacked-screen regenerator is a key component in a thermoacoustic Stirling engine. Therefore, the choice of suitable mesh screens is important in the engine design. To verify the applicability of four empirical equations used in the field of thermoacoustic engines and Stirling engines, this report describes the measurements of heat flow rates transmitted through the stacked screen regenerator...

In this paper we propose one allocation strategy and two strategies for sparse regenerator placement in translucent optical networks, namely Most Used Regenerator Placement (MURP) and Most Simultaneous Used Regenerator Placement (MSURP). The novel regenerators placement algorithms are compared with other ones presented in literature. They are tested on the proposed regenerator allocation algori...

Honeycomb ceramic is the key component of the regenerative system. The three-dimensional numerical model has been established for thermal process in honeycomb regenerator. The numerical simulation was performed using FLUENT, a commercial computational fluid dynamics (CFD) code, to compare simulation results to the test data. The regenerative process of a honeycomb ceramic regenerator was simula...