In this paper, the method of determining thermal contact resistance of wavy surfaces is discussed exactly. For determining the thermal contact resistance of real contacts, a new method has been presented. In this method, assuming a regular sinusoidal surface profile, the real contact area in terms of applied forces has been determined. Then thermal contact resistance has been calculated. Testin...

In internal combustion engines, exhaust valve and its seat gain considerable temperature as the hot gases exit through them. So, the rate of heat transfer should be under control. In this study, the contact heat transfer coefficient has been estimated. An experimental study on an Air-Cooled internal combustion engine cylinder head has been considered. Using the measured temperatures of sensors ...

A contact transient electrothermal technique (CTET) is developed to characterize the thermal transport between one-dimensional conductive and nonconductive microscale wires that are in point contact. This technique is a significant advance from the transient electrothermal method that is used to characterize the thermophysical properties of individual one-dimensional micro-wires. A steadystate ...

High-temperature thermal contact resistance (TCR) plays an important role in heat-pipe-cooled thermal protection structures due to the existence of contact interface between the embedded heat pipe and the heat resistive structure, and the reduction mechanism of thermal contact resistance is of special interests in the design of such structures. The present paper proposed a finite element model ...

The cooling capacity, efficiency and cooling flux for a single stage thermoelectric cooler, as part of a multistage cooler, is analyzed in this study. The Lagrange Multiplier method is used to develop nonlinear algebraic equations for the optimum condition for different objective functions. The analysis includes the effect of heat leak, thermal boundary resistances with thermal reservoirs and t...

A model is developed in this work to predict the thermal contact resistance of carbon nanotube (CNT) array interfaces with CNT arrays synthesized directly on substrate surfaces. An analytical model for contact mechanics is first developed in conjunction with prior data from load–displacement experiments to predict the real contact area established in CNT array interfaces as a function of applie...

In this paper, the heat transfer performances of aluminum metal foams, placed on horizontal plane surface, was evaluated in forced convection conditions. Three different types of contacts between the sample and the heated base plate have been investigated: simple contact, brazed contact and grease paste contact. First, in order to perform the study, an ad hoc experimental set-up was built. Seco...

Improving the power handling capability of direct contact RF MEMS switches requires a knowledge of conditions at the contact. This paper models the temperature rise in a direct contact RF MEMS switch, including the effects of electrical and thermal contact resistance. The maximum temperature in the beam is found to depend strongly on the power dissipation at the contact, with almost no contribu...