A new direct contact platform for capillary column precise temperature control based upon the use of individually controlled sequentially aligned Peltier thermoelectric units is presented. The platform provides rapid temperature control for capillary and microbore liquid chromatography columns and allows simultaneous temporal and spatial temperature programming. The operating temperature range ...

Until now, all methods for temperature sensing in capillary electrophoresis (CE) relied on molecular probes with temperature-dependent spectral/optical properties. Here we introduce a nonspectroscopic approach to determining temperature in CE. It is based on measuring a temperature-dependent rate constant of complex dissociation by means of a kinetic CE method known as nonequilibrium capillary ...

Novel packed-capillary columns for gas chromatography were developed with a thin-wall stainless-steel capillary of 1.0 mm i.d.; and rapid temperature-programmed separations have been carried out after a basic evaluation concerning the compatibility of these columns to the temperature program. With a numerical integration method, the retention of several test analytes during temperature-programm...

Potential applied at the two ends of a tapered capillary can produce an electric field and a pH gradient at the same time. These fields will effect electrophoretic separation, if the diameters of capillaries are not uniform. In some cases these gradients can be used to our advantage. For example, this approach provides a simple way to perform isoelectric focusing without carrier ampholytes as J...

OBJECTIVES Capillary refill time is an important diagnostic adjunct in the acute resuscitation phase of the shocked child. This study assesses its relation to commonly measured haemodynamic parameters in the postresuscitation phase when the child has reached the intensive care unit, and compares this with core-peripheral temperature gap. METHODS Ninety standardised measurements of capillary r...

Application of capillary electrophoresis (CE) to temperature-sensitive biomolecular interactions requires knowledge of the temperature inside the capillary. The simplest approach to finding temperature in CE employs a molecular probe with a temperature-dependent parameter. Up until now only spectral parameters of molecular probes were utilized for temperature measurements in CE. The arbitrary n...

We demonstrate measurement and control of nanoscale single-asperity friction by using cantilever probes featuring an in situ solid-state heater in contact with silicon oxide substrates. The heater temperature was varied between 25 and 790 °C. By using a low thermal conductivity sample, silicon oxide, we are able to vary tip temperatures over a broad range from 25 ± 2 to 255 ± 25 °C. In ambient ...

This study describes a capillary-based device integrated with the heating and cooling modules for polymerase chain reaction (PCR). The device consists of the reaction polytetrafluoroethylene (PTFE) capillary, the aluminum blocks, and is equipped with two cartridge heaters, a thermoelectric (TE) cooler, a fan, and some thermocouples for temperature control. The cartridge heaters are placed into ...

The present work describes a reactor that allows in situ measurements of spatially resolved kinetic data in heterogeneous catalysis. The reactor design allows measurements up to temperatures of 1300 degrees C and 45 bar pressure, i.e., conditions of industrial relevance. The reactor involves reactants flowing through a solid catalyst bed containing a sampling capillary with a side sampling orif...