The effect of the refractive index of the substrate together with the incident polarization on the optimization of sawtooth surface-relief gratings (SRGs) is investigated. The global optimum diffraction efficiencies of the -1st forward-diffracted order of sawtooth SRGs are 63.3% occurring at n2=1.47 for TE polarization and 73.8% occurring at n2=2.88 for TM polarization. Incident TE polarization...

A novel integrated TM-pass waveguide polarizer with a subwavelength-wide slot is introduced and theoretically analyzed. With a proper design of the slot, the waveguide can be used as a single polarization waveguide to guide only TM polarization modes of the light signal. With 26 microm length of this TM-pass polarizer, our computer simulations predict the insertion loss of 0.54 dB for the TM po...

Using a newly proposed augmented low-index-guiding scheme with silicon nitride/silicon dual-core waveguide, we have designed, fabricated, and characterized a transverse electric (TE) to transverse magnetic (TM) and TM-to-TE compact polarization rotator. The polarization rotation is realized in an asymmetric directional coupler. The measured peak conversion efficiencies for the TE-to-TM and TM-t...

Polarization independence in a one-dimensional resonant grating waveguide structure involves the simultaneous excitation of two guided modes propagating in different directions. Possible simultaneous excitations occur when the two excited guided modes have either the same polarization, i.e., TE-TE (transverse electric) or TM-TM (transverse magnetic), or different polarizations, i.e., TE-TM. Sim...

in this article, we suggested a novel design of polarization splitter based on coupler waveguide on inp substrate at 1.55mm wavelength. photonic crystal structure is consisted of two dimensional (2d) air holes embedded in inp/ingaasp material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. the photonic band gap (pbg) of this structure is determined using t...

In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...

A single crystal-based organic light-emitting device (OLED) with intrinsically polarized and color-tunable electroluminescence (EL) has been demonstrated without any subsequent treatment. The polarization ratio of 5:1 for the transversal-electric (TE) and transversal-magnetic (TM) polarization at the emission peak of 575 nm, and 4.7:1 for the TM to TE polarization at the emission peak of 635 nm...

The use of transverse electric (TE) polarization has dominated illumination schemes as selective polarization is used for high-NA patterning. The benefits of TE polarization are clear – the interference of diffracted beams remains absolute at oblique angles. Transverse magnetic (TM) polarization is usually considered less desirable as imaging modulation from interference at large angle falls of...

A theoretical study of differences in broadband high-index-contrast grating (HCG) reflectors for TM and TE polarizations is presented, covering various grating parameters and properties of HCGs. It is shown that the HCG reflectors for TM polarization (TM HCG reflectors) have much thicker grating thicknesses and smaller grating periods than the TE HCG reflectors. This difference is found to orig...

We have demonstrated a self-starting, passively mode-locked Tm/Ho codoped fiber laser that lases at one of two center wavelengths. An amplified 1.56 μm distributed feedback laser pumps a ring laser cavity which contains 1 m of Tm/Ho codoped silica fiber. Mode locking is obtained via nonlinear polarization rotation using a c-band polarization sensitive isolator with two polarization controllers....