gas mixing in a t-shape micro mixer has been simulated using the direct simulation monte carlo (dsmc) method. it is considered that the adequate mixing occurs when the mass composition of the species, co or n2, deviates below 1 % from their equilibrium composition. the mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. as the inlet kn increases, while ...

Gas mixing in a T-shape micro mixer has been simulated using the Direct Simulation Monte Carlo (DSMC) method. It is considered that the adequate mixing occurs when the mass composition of the species, CO or N2, deviates below 1 % from their equilibrium composition. The mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. As the inlet Kn increases, while ...

a micro-channel heat exchanger reactor with different micro-baffle shapes has been studied numerically. governing equations were solved base on the finite volume method with fluent software. in upper section, oxidation reaction of methanol was occurred and in lower section, steam reforming of methanol was done. two sections were separated with solid part which played as heat exchanger and trans...

A micro-channel heat exchanger reactor with different micro-baffle shapes has been studied numerically. Governing equations were solved base on the finite volume method with FLUENT software. In upper section, oxidation reaction of methanol was occurred and in lower section, steam reforming of methanol was done. Two sections were separated with solid part which played as heat exchanger and trans...

The effect of catalyst particle size on dehydration of methanol to dimethyl ether is investigated using fixed bed and micro-channel reactors at different temperatures and weight hourly space velocities. The experiments were carried out at 290 and 320oC. The space velocities were changed from 10 up to 90h-1 and from 1.22 to 3.65h-1 for fixed bed and micro-channel reactors, respectively. Consider...

because of its kinetic nature and computational advantages, the lattice boltzmann method (lbm) has been well accepted as a useful tool to simulate micro-scale flows. the slip boundary model plays a crucial role in the accuracy of solutions for micro-channel flow simulations. the most used slip boundary condition is the maxwell slip model. the results of maxwell slip model are affected by the ac...

shape error due to elastic recovery of formed part in unloading known as springback, is one of the most important problems of tool design in sheet metal forming processes. many researches have been performed for proposing an efficient method to decrease or compensate springback error in sheet forming processes. these methods are usually based on iterative finite element algorithms. in this pape...

steam reforming integrated with oxidation of methanol was considered with numerical simulation. the parallel micro-channels with circular cross sections were used. because when the catalytic deposited inside the rectangular micro-channels, it fills up the edges. hence, the approximation of a cylindrical channel is appropriate. effect of this changing in cross section was considered and results ...

We used continuous flow micro-devices as bioreactors for the production of a glycosylated pharmaceutical product (a monoclonal antibody). We cultured CHO cells on the surface of PMMA/PDMS micro-channels that had been textured by micromachining and coated with fibronectin. Three different micro-channel geometries (a wavy channel, a zigzag channel, and a series of donut-shape reservoirs) were tes...

Miniaturization encourages the development of new manufacturing processes capable of fabricating features, like micro-channels, in order to use them for different applications, such as in fuel cells, heat exchangers, microfluidic devices and micro-electromechanical systems (MEMS). Many studies have been conducted on heat and fluid transfer in micro-channels, and they appeared significantly devi...