in this paper, buckling of simply supported column with an edge crack is investigated numerically and analytically. four different scenarios of damage severities are applied to a column, open crack assumption and the effect of closing crack in stability of the column which depends on position and size of cracks, are numerically compared. crack surfaces contact is modeled with gap element using ...

the main objective of this project was to investigate the behavior and the damaging effects of hot tear segregationsin the continuously cast steel blooms on the final product quality. to achieve this aim, plant data from three differenttypes of steels were used. investigations using the scanning electron microscope (sem) equipped with energydispersive x-ray spectroscopy (eds) probe and metallog...

The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...

An infinite elastic medium with a planar crack is considered. The crack is subjected to the pressure of fluid injected at a point on the crack surface. Description of the crack growth is based on the lubrication equation (balance of the injected fluid and the crack volume), the equation for crack opening caused by fluid pressure on the crack surface, the Poiseuille equation related local fluid ...

This paper presents a study of generalized enrichment functions for three-dimensional curved crack fronts. Two coordinate systems used in the definition of singular curved crack front enrichment functions are analyzed. In the first one, a set of Cartesian coordinate systems defined along the crack front is used. In the second case, the geometry of the crack front is approximated by a set of cur...

Lasers provide a non-contact and remote inspection method with high resolution and sensitivity. As a crack detection tool, laser ultrasonics can be used to image surface-breaking cracks with microscopic precision. By monitoring the local elastic scattering conditions and dynamic motion fields present in the immediate vicinity of a surface-breaking crack site, the local crack morphology can be m...

* Corresponding author; Email: [email protected] ABSTRACT An important task in mixed-mode fracture analysis and prediction is the simulation of crack growth under mixed-mode conditions. To complete such a task, one must have (a) a computer code capable of handling the kinematics of general crack growth and determining the stress and deformation states during crack growth, and (b) a fracture crit...

A new experimental method, called the 'hole filling method', is proposed to simulate the healing of internal cracks in rolled workpieces. Based on the experimental results, the evolution in the microstructure, in terms of diffusion, nucleation and recrystallisation were used to analyze the crack healing mechanism. We also validated the phenomenon of segmented healing. Internal crack healing inv...

This paper deals with the effect of several residual stress profiles on the fatigue crack propagation in prestressing steel wires subjected to tension loading or bending moment. To this end, a computer program was developed to evaluate the crack front evolution on the basis of the Walker law. Results demonstrate that the absence of residual stresses makes the crack propagate towards a preferent...

Fluctuations in the crack tip structure should result in the release of elastic waves that propagate both into the bulk as well as along the surface. Ramanathan and Fisher (1997), and Morrisey and Rice (1998) examined such wave interactions in a series of increasingly sophisticated models. The possibility that in-plane and out-of-plane perturbations could persist along the crack surface, result...