the influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. a testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. according to the results of the experiments, dry friction coefficient is affected by both magnitude and...

The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...

Micro flexible rolling aims to fabricate submillimeter thick strips with varying thickness profile, where the surface quality of products is mainly determined by initial workpiece surface roughness and subsequent surface asperity flattening process, which is affected by process parameters during rolling. This paper shows a 3D finite element model for flexible rolling of a 250 μm thick workpiece...

Study of contact and friction at multiple length scales is necessary for the effective design and analysis of surfaces in sliding microand nano-electromechanical systems (MEMS/NEMS). As loading forces decrease in such applications, the size of the asperity contacts tends to decrease into the nano scale regime. Also with the increase in surface area to volume ratio in such systems, the surface f...

Understanding friction between material pairs is very crucial when utilizing the materials in various applications, including mechanical and biological systems. In the present investigation, efforts were made to study the influence of surface texture and roughness on friction and transfer film formation during sliding of Ultra High Molecular Weight Polyethylene (UHMWPE) pins against steel plate...

In the present investigation, basic studies were conducted using an inclined pin-on-plate sliding tester to understand the influence of tilt angle and grinding marks direction of the plate on coefficient of friction and transfer layer formation during sliding against soft aluminium (Al) pin. 080 M40 steel plates were ground to attain different surface roughness with unidirectional grinding mark...

A kind of 2.5-dimensional C/C-SiC composites was fabricated by using Isothermal Chemical Vapour Infiltration process (ICVI). Frictional properties of this material were evaluated by using MM-1000 under dry condition. Average dynamic friction coefficient of it was 0.16, static friction coefficient and average coefficient stability were 0.15 and 0.56, respectively. However, weight wear rate was l...

* Current address – Department of Industrial Engineering, University of Wisconsin-Milwaukee, Milwaukee, WI 53201 † Corresponding author – [email protected] Tel: +91-80-22932301 Fax: +91-80-23600648 ABSTRACT Surface texture influences friction and transfer layer formation during sliding. In the present investigation, three well-defined surface textures namely unidirectional, 8-ground, ...

This experimental work is oriented to give a contribution to the knowledge of the relationship among surface roughness parameters and tribological properties of lubricated surfaces; it is well known that these surface properties are strictly related, but a complete comprehension of such correlations is still far to be reached. For this purpose, a mechanical polishing procedure was optimized in ...