conceptual design of a waste heat recovery cycle is carried out in attempt to enhance the thermal efficiency of a steam power plant. in the recovery system, super-critical an co2 is employed as the working fluid operating in a brayton cycle. low grade heat rejected by the flue gases through the stack is used as the primary heat source, while a secondary heat exchanger utilizes the hot gases lea...

The effects of CO2-water-rock interactions on the mechanical properties of shale are essential for estimating the possibility of sequestrating CO2 in shale reservoirs. In this study, uniaxial compressive strength (UCS) tests together with an acoustic emission (AE) system and SEM and EDS analysis were performed to investigate the mechanical properties and microstructural changes of black shales ...

A high pressure stage for CO2 processing has been designed, certified according to Canadian Standards Association (CSA) regulations, and built by an approved pressure-vessel manufacturer. This stage is designed to fit onto a normal laboratory powder diffractometer. Together with the use of MoKα radiation and a Bruker Våntec PSD detector, this stage will allow extensive studies on the kinetics o...

This paper presents results from stability analysis and testing on high pressure CO2 centrifugal compressors, beginning by a preliminary analysis conducted on an academic institution. It includes results of stability tests that were carried out in manufacturer facilities. The tests were done on two different compressor designs, both operating with high content of CO2 in super critical condition...

open-celled foams are capable to allow the passage of fluids through their structure, because of interconnections between the open cells or bubbles and therefore these structures can be used as a membrane and filter. in thiswork, we have studied the production of polystyrene open-celled microcellular foam by using co2 as blowing agent. to achieve such structures, it is necessary to control the ...

Storage of anthropogenic CO2 in geological formations relies on a caprock as the primary seal preventing buoyant super-critical CO2 escaping. Although natural CO2 reservoirs demonstrate that CO2 may be stored safely for millions of years, uncertainty remains in predicting how caprocks will react with CO2-bearing brines. This uncertainty poses a significant challenge to the risk assessment of ge...

Drill mud is a fluid which is used in oil extraction industries in order to cool and lubricate the drill bit. Due to containing numerous toxic components, it is considered as a hazardous waste which must be treated before discharging to the environment. Current separation techniques for drill cutting treatment can be categorized into three main categories of physical (dewatering), physiochemica...

This report focuses on the technical approach that was outlined in the research proposal as well as the work that has been initiated since the start of this project. The first section summarizes the general technical approach on which this research is based. The remaining sections describe the studies that have been initiated since the project began and present some of the pertinent, preliminar...