Mononethanolamine (MEA)-based absorption-stripping for CO2 capture is studied. Energy demands in this process are dominated by the stripping column. The shortest stripping line distance approach is used to determine minimum energy requirements for the MEA stripping column under various lean loadings. Simultaneous reaction and vapor-liquid equilibrium is assumed and modeled by the direct incorpo...

In this work modelling and experimental validation of an integrated process for the removal of carbon dioxide from ammonia solutions is presented (decarbonisation). In this process, carbon dioxide is stripped out from the solution simultaneously with small amounts of ammonia at ambient pressure in a packed column. Recovery of the stripped ammonia can be reached by combining absorption of ammoni...

Traditionally, distillation column profiles have been divided into rectifying and stripping profiles, described by the liquid composition along the column. Recently, Tapp et al. (2003) defined a generalised column section and the composition profiles in these sections are described by the Difference Point Equation. Column sections can be sequenced by the designer (within certain constraints) an...

this research includes both experimental and cfd investigation in the hydrodynamic behavior of a new type of column tray introduced as “concap” tray. the proposed column tray is used in contactor columns especially in stripping columns. the hydrodynamics of this concap tray is investigated in a 1.2m in diameter column. using air-water system, the experiments were performed for different liquid ...

An internally heat integrated distillation column, HIDiC, offers the maximum energy saving potential for difficult and energy intensive separations, such as propylenepropane and the like, which are carried out in tray columns. A novel type of HIDiC was developed by TUDelft, namely a concentric distillation column in which a low pressure annular stripping section is configured around a high pres...

This research includes both experimental and CFD investigation in the hydrodynamic behavior of a new type of column tray introduced as “Concap” tray. The proposed column tray is used in contactor columns especially in stripping columns. The hydrodynamics of this Concap tray is investigated in a 1.2m in diameter column. Using air-water system, the experiments were performed for different liquid ...

Invariant rectifying and stripping (IRS) curves are used for thermodynamic analysis of a distillation column. Thermal integration of a distillation column with the background process through side exchangers (side reboilers/condensers) is important for energy-efficient design of a distillation column. Thermal integration of a distillation column through side exchangers also improves the exergeti...

One Column Stripping with non-increasing Area first mapping algorithm (OCSA) was proposed by Chakchai So-In et al to schedule bursts on downlinks of base station by giving priority to the largest bursts to OFDMA frame. However, size-based scheduling that favor large items are known to exhibit poor average delay performance especially under workload distributions that are highly skewed (i.e., he...

-The distribution of toxic heavy metals was studied throughout the process of treatment of domestic wastewater by stabilization ponds. The concentrations and distribution of free and bound zinc, cadmium, lead and copper through the various stages of a treatment plant were analyzed by Anodic Stripping Voltammetry (ASV). Only a slight decrease in the total metals concentration was observed during...