in the present study, the capability of accumulative roll bonding (arb) and subsequent heat-treatment to fabricate solid solution from a multilayered cu/zn/al was investigated. two post-heat treatment (one-step and two-step) routes were proposed. in the first, the arb processed material was heated to 800 c for 5:30 hours and allowed to cool slowly in a furnace (one-step route). in the second (t...

Local hardness increasing on the surface of the power plant rotor may result in severe damages. One major solution for rapid repairing of the rotors is the adaptive tempering heat treatment. For this purpose, after identification of the damaged rotor, initial investigations and tests (such as visual inspection, chemical analysis, nondestructive hardness measurements and replica or on-site metal...

the purpose of this study was to investigate the effect of heat treatment including solution treatment and aging on the microstructure of cast nickel-based in100 superalloy including size, volume fraction and morphology of primary γ' and different kinds of carbides. for this purpose, different solution heat treatment cycles and a constant aging cycle were implemented on cast ingot samples and t...

accumulative roll bonding (arb) was used to fabricate the cu-zn multilayer and cu-zn solid solution. a lamellar structure with the hardness of about 130 vhn was formed after eight arb cycles. following to the suitable heat treatment, a solid solution with a uniform microstructure and hardness of about 57 vhn was produced. the dominant wear mechanism in the arb processed multilayer was found to ...

this work concerns the peristaltic flow of a williamson fluid model in an inclined asymmetric channel under combined effects of heat and mass transfer. the governing nonlinear partial differential equations are simplified under the lubrication approach and then solved analytically and numerically. the analytical results are computed with the help of regular perturbation and the numerical result...

In the current study, the sources of variation in the mean hardness value of heat treated aluminum 2024 samples were identified by using metallurgical study and design of experiment methodology (full factorial method). Hardness measurements and microstructural investigations of the samples were carried out using Brinell hardness test and optical microscopy, respectively. The effects of several ...

A new type of unsaturated poly ester-amide was prepared by melt polycondensation and characterized completely. Influence of heat treatment conditions and cross-linking content on mechanical and degradation properties of unsaturated polyester-amide were studied. Results suggested that the newly synthesized unsaturated poly(ester-amide) possessed good heat stabilization properties. Mechanical...

In the present study, the capability of accumulative roll bonding (ARB) and subsequent heat-treatment to fabricate solid solution from a multilayered Cu/Zn/Al was investigated. Two post-heat treatment (one-step and two-step) routes were proposed. In the first, the ARB processed material was heated to 800 C for 5:30 hours and allowed to cool slowly in a furnace (one-step route). In the second (t...

in this study, mixed metal oxides al2o3/mgo/tio2 coatings with al/mg/ti ratio of 5:1:3 and 2.5:3:4 were coated on aluminum by sol-gel method. the surface morphology, phase analysis, thermal behavior and the corrosion behavior of the al2o3/mgo/tio2 coatings were characterized by (sem), (xrd), (tg-dta) and potentiodynamic polarization test in 3.5 wt.% nacl solution. the results demonstrated that ...