Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...

The article presents the milled surface quality of Uni-Directional Carbon Fibre Reinforced Polymer (UD-CFRP) composites from Taguchi’s and grey relational analysis. novelty is demonstrating possibility detecting defects in polymer during milling using SEM material used for this study UD-CFRP composite laminates made by hand-layup process. All operations were carried out a solid tungsten carbide...

This paper describes the fabrication and mechanical testing of Al-Mg-boron carbide particulate composites using stir casting technique. The size of the boron carbide particulates is ranging between 30 to 100 μm. The boron carbide contents are varied from 3 and 7% by weight and are dispersed in the alloy matrix. The mechanical properties of the castings, particularly their tensile properties and...

it is only thirteen years since the scanning electron microscope has been available commercially. yet, even in this short period of time, this instrument has been a powerful tool in the investigation of topography, electrical and magnetic properties, crystal structure, cathodoluminescent characteristics etc. of solid specimens. today, this type of microscope has opened its place alongside the c...

deep cryogenic heat treatment is assumed as a supplementary heat treatment performed on steels before the finaltempering treatment to enhance the wear resistance and hardness of the steels. in this study, the effects of thedeep cryogenic heat treatment on the wear behavior and corrosion resistance of the 1.2080 tool steel were studiedusing the wear testing machine and polarization and impedance...

In sheet metal forming (SMF), the major failure reason is galling. Galling is a process of different wear stages that leads to destruction of both the forming tool and the sheet metal working piece and is, because of that, of big economic importance for the SMF industries. Therefore, investigations and researches about how tool steels microstructure affect the tool steels galling resistance is ...

Backscattered electron Kikuchi patterns (BEKP) suitable for crystallographic phase analysis can be collected in the scanning electron microscope (SEM) with a newly developed charge coupled device (CCD) based detector. Crystallographic phase identification using BEKP in the SEM is unique in that it permits high magnification images and BEKPs to be collected from a bulk specimen. The combination ...

Deep cryogenic heat treatment is assumed as a supplementary heat treatment performed on steels before the final tempering treatment to enhance the wear resistance and hardness of the steels. In this study, the effects of the deep cryogenic heat treatment on the wear behavior and corrosion resistance of the 1.2080 tool steel were studied using the wear testing machine and polarization and impeda...