AbstractSputtered MoS2 coatings have been mostly used as a solid lubricant. In this investigation, MoSx/Ni composite coatings with Ni contents varying from 0 to 22 % were deposited onto steel substrate using a DC magnetron sputter process. The MoS2/Ni ratio in the coatings was controlled by sputtering the composite targets. The composition, microstructure, and mechanical properties of the...

In this work, we incorporated a quartic bond potential into a coarse-grained bead-spring model to study lubricant adsorption on a solid surface as well as depletion instability. The surface tension density and the number density profiles were examined to verify the solid-liquid and liquid-vapor interfaces during heat treatment. It was found that both the liquid-vapor interfacial thickness and t...

A deterministic theory describing the behavior of an ultrathin lubricant film between two atomically-smooth solid surfaces is proposed. For the description of lubricant state the parameter of excess volume arising due to chaotization of solid medium structure in the course of melting is introduced. Thermodynamic and shear melting is described consistently. Dependences of friction force on tempe...

Within the idealized scheme of a 1-dimensional Frenkel-Kontorova-like model, a special “quantized” sliding state was found for a solid lubricant confined between two periodic layers [1]. This state, characterized by a nontrivial geometrically fixed ratio of the mean lubricant drift velocity 〈vcm〉 and the externally imposed translational velocity vext, was understood as due to the kinks (or soli...

We construct a computer code to solve the (Nosé Hoover) finite-temperature classical dynamics of a Lennard-Jones solid lubricant slab between two rigid solid substrates. The code is based on a standard periodically repeated supercell scheme, which imposes relative substrates/lubricant densities. We investigate the possible occurrence of Moiré patterns due to incommensurability, and for the drag...

Vapor phase lubrication is considered one of the most likely means of lubricating MEMS devices with replenishable solid films. Since gas phase diffusion is the primary means of vapor lubricant transport into the long, narrow channels of MEMS devices, it is necessary to determine that this is sufficient to replenish lubricant films worn at high rates. The diffusion of vapor phase lubricant into ...

Within the idealized scheme of a 1-dimensional Frenkel-Kontorova-like model, a special ”quantized” sliding state was found for a solid lubricant confined between two periodic layers [1]. This state, characterized by a nontrivial geometrically fixed ratio of the mean lubricant drift velocity 〈vcm〉 and the externally imposed translational velocity vext, was understood as due to the kinks (or soli...

The dragging velocity of a model solid lubricant confined between sliding periodic substrates exhibits a phase transition between two regimes, respectively, with quantized and with continuous lubricant center-of-mass velocity. The transition, occurring for increasing external driving force F ext acting on the lubricant, displays a large hysteresis, and has the features of depinning transitions ...

The solid particle contamination is a challenge for the cement industries due to the highly dusty environment. The contaminants cause severe wear between moving surfaces and this in turn leads to rapid mechanical failure of the machine elements. The solid particle contaminants get into the lubricant among the metal surfaces due to the environmental conditions. The conditions get more severe in ...

Using shear dynamics simulations we investigated the structure and dynamics of hexadecane (n-C 16 H 34) lubricant lms connned between two solid surfaces (Fe 2 O 3) covered with a self-assembled monolayer of wear inhibitors dithiophosphate molecules DTP = S 2 P(OR) 2 with R = iPr, iBu, and Ph]. We found signiicant density oscillations in the lubricant lms, especially near the top and bottom boun...