نتایج جستجو برای: Simple Shear Extrusion

تعداد نتایج: 535995  

Circular simple shear extrusion process was introduced as a new geometry for simple shear extrusion technique to fabricate ultrafine-grained materials. Similar to the simple shear extrusion method, this process is also based on direct extrusion, and the samples deform in a simple shear manner. In this investigation, the simulations were carried out using the commercial finite element code ABAQU...

Journal: :physical chemistry and electrochemistry 0
ramineh medhat department of materials science and engineering, shiraz university, shiraz, iran mahmoud pakshir department of materials science and engineering, shiraz university, shiraz, iran khashayar morshed behbahani department of materials science and engineering, shiraz university, shiraz, iran pooria najafisayar department of materials science and engineering, shiraz university, shiraz, iran

in this study, the effects of forming method (extrusion) and environmental factors (solution ph and temperature) on the corrosion performance of az91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (eis), scanning electron microscopy (sem) and salt spray techniques. the polarization test results of the specimens showed that simple sh...

Journal: :Journal of Polymer Engineering 2022

Abstract The review considers the possibilities of new methods solid-state extrusion polymers based on use deformation schemes that include simple shear - equal-channel angular extrusion, multi-angle and combined extrusion. Information evolution physico-mechanical properties glassy, semi-crystalline polymers, polymer blends composites is given.

The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained a...

Journal: :IOP Conference Series: Materials Science and Engineering 2014

2010
Alan D. Chapman Steven Kidder Jason B. Saleeby Mihai N. Ducea

[1] The Rand and Sierra de Salinas schists of southern California were underplated beneath the southern Sierra Nevada batholith and adjacent Mojave‐Salinia region along a shallow segment of the subducting Farallon plate in Late Cretaceous time. Various mechanisms, including return flow, isostatically driven uplift, upper plate normal faulting, erosion, or some combination thereof, have been pro...

2012
P. Tomar R. K. Pandey

The objective of this paper is to investigate the viscous shear heating effect on the formation of minimum film thickness in inlet zone of the hydrostatic extrusion process as function of various operating parameters. Minimum film thicknesses in the inlet zone has been evaluated at various extrusion speeds, material parameters, extrusion pressures, and die semiangle for extrusion of low strengt...

In this study, the effects of forming method (extrusion) and environmental factors (solution pH and temperature) on the corrosion performance of AZ91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and salt spray techniques. The polarization test results of the specimens showed that simple sh...

In this study, corrosion behavior of copper that was deformed by Simple Shear Extrusion (SSE) method was investigated in 3%wt NaCl solution. Modified Williamson-Hall method, applied on the X-ray diffraction patterns of the samples, showed that increase in the number of SSE passes led to increasing in the dislocation density in the copper samples. Moreover, such deformed samples exh...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید