The purpose of this research was to investigate if physical properties could be improved by incorporating a tulle reinforcement material into a maxillofacial silicone elastomer. A-2186 silicone elastomer was used in this study. The study group consisted of 20 elastomer specimens incorporated with tulle and fabricated in dumbbell-shaped silicone patterns using ASTM D412 and D624 standards. The c...

This paper presents our studies on surface modification of silicone elastomer by collagen grafting/coating and electron beam irradiation. Two types of collagen hydrolysates with different molecular weights were obtained and characterized, which were used in experiments. Both silicone elastomer crosslinking and collagen grafting on the surface of silicone elastomer were achieved by electron beam...

INTRODUCTION The aim of the study is to evaluate interfacial bond strength between silicone prosthetic elastomers and polymethylmethacrylate (PMMA). MATERIALS AND METHODS Silicone elastomers were attached to PMMA and a total 120 specimens were fabricated which were then subdivided into 12 sub-groups. Each sample was then subjected to laboratory test to determine the bond strength. The specime...

● TABLE II Thin Layer ... Abstract TOP The cause of silicone gel implant aging and rupture is not known. Recent reports indicate the failure rate is higher than previously published, and implant aging and rupture may be due to progressive mechanical deterioration of the outer vulcanized silicone shell. It is known that lipids are absorbed by the hydrophobic silicone elastomer, and lipid infiltr...

In this study, a maxillofacial silicone elastomer was stained with cigarette smoke. The stain was then removed by solvent extraction using 1,1,1-trichloroethane. The cigarette smoke produced large color changes in the elastomer as measured from spectrophotometric reflectance curves. The solvent was totally effective in removing the cigarette stain without changing the color of the silicone base.

BACKGROUND Colour degradation is a major problem in maxillofacial silicone elastomers. Recent studies have focused on colour stability and the mechanical properties of the silicone elastomers. A colour match is also essential for the acceptance of the prosthesis by the patient. The aim of this study is to assess the colour degradation of the silicone elastomer after being moulded in different c...

background and aims. the condensation silicone impression materials are available, but there is little knowledge of their accuracy after disinfection. the objective of this study was to evaluate the effect of the disinfection by spray atomization on dimensional accuracy of condensation silicone impressions. materials and methods. impressions were made on a stainless steel master model containin...

STATEMENT OF PROBLEM Conventionally, maxillofacial prostheses are fabricated by hand carving the missing anatomic defect in wax and creating a mold into which pigmented silicone elastomer is placed. Digital technologies such as computer numerical control (CNC) milling and 3-dimensional (3D) printing have been used to prepare molds directly or indirectly into which a biocompatible pigmented sili...

PURPOSE In the authors' experience, the color of silicone elastomer following polymerization in molds made of gypsum products is slightly different from the color that was matched in the presence of the patient, before the silicone is packed. It is hypothesized that the investing materials and separating media have an effect on the color during the polymerization process of the silicone. MATE...