نتایج جستجو برای: Silicon particles
تعداد نتایج: 233671 فیلتر نتایج به سال:
in this research, using pyrolysis of phenolic resin in the presence of silicon particles, the sic ceramic composite is formed. the samples were prepared by introducing 30, 35, 40, 45 and 50 wt% of si particles to the phenolic resin. the samples were cured at 180°c then carbonized at 1100°c. the final carbonized c/si composites are hot-pressed at 1500°c in inert atmosphere, which is more than th...
Aluminium base alloy (Al-Cu-Si) was reinforced with silicon carbide (SiC) particles, in various percentage compositions from 0-20 wt%. Silicon carbide particle size of 20µm was selected. The molten slurry of SiC reinforced base aluminium metal was casted through green and dry sand casting methods and solidification process was carried out under ambient conditions. A selected population...
In the current study, effect of varying Silicon Carbide particulate on the mechanical properties of Aluminium based alloy automobile brake disc component was investigated. The result of experimental investigation on mechanical properties of Silicon Carbide particle reinforced Aluminium Matrix was achieved for composite brake disc using universal tensile test machine, Rockwell hardness testing m...
An experiment set-up is used to study wall deposition rate of particles on a rough surface in a turbulent channel flow. Deposition velocities for three classes of particles, namely, spherical glass particles, irregular shape polymer particles, and fibrous silicon particles are studied. The particle concentration at the test section was measured with the aid of an isokinetic probe in conjunction...
Metal-assisted chemical etching of silicon is an electroless method that can produce porous silicon by immersing metal-modified silicon in a hydrofluoric acid solution without electrical bias. We have been studying the metal-assisted hydrofluoric acid etching of silicon using dissolved oxygen as an oxidizing agent. Three major factors control the etching reaction and the porous silicon structur...
Characterization of polycrystalline silicon particles produced in a fluidized bed reactor via CVD from monosilane was carried out It was observed that part of the hydrogen from monosilane remained in the particles. Most of hydrogen was bonded to silicon and temperatures as high as 1300 K were required to dehydrogenate the silicon particles. Particles were contaminated with metal elements which ...
We describe the synthesis and the physical properties of suspensions of colloidal silicon and silica rodlike particles. In addition to pure silicon and pure silica rods, we have also synthesized silicon rods with a silica shell and silica rods with a fluorescent silica layer. Pre-patterned p-type (100) silicon wafers were electrochemically etched in electrolyte solutions containing hydrogen flu...
In the present research, thixoforming route was carried out in order to enhance the microstructural features of LM28 piston alloy. Typical microstructure of this alloy was composed of coarse, polygonal primary silicon particles, eutectic matrix and intermetallic phases. Thermal analysis was carried out to study the solidification path of the base alloy and determine the major arrest temperature...
A template-free fabrication method for silicon nanostructures, such as silicon micropillar (MP)/nanowire (NW) composite structure is presented. Utilizing an improved metal-assisted electroless etching (MAEE) of silicon in KMnO4/AgNO3/HF solution and silicon composite nanostructure of the long MPs erected in the short NWs arrays were generated on the silicon substrate. The morphology evolution o...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید