this work is focused on synthesis of sio2- cnt hybrides via sol-gel method. homogeneous distribution of carbon nanotubes within silicon matrix was obtained by mixing the functionalized carbon nanotube (cntcooh) with active silicic acid followed by titration to the solution of sodium silicate (na2sio3) under the average temperature condition of 80?c. different ratios of multi-walled carbon nanot...

the direct conversion of methane to c2 hydrocarbons, in a quartz tube reactor enforced by a dc corona discharge, was investigated at atmospheric pressure. the process was carried out in the presence of metal oxide catalysts of mn/w/sio2, mn/w/sio2 (tetraethyl orthosilicate, teos), and mn/w/cnt (supported on carbon nanotubes). the total yield to c2 hydrocarbons in the presence of metal oxide cat...

A comparison study has been conducted on the formation of catalyst nanoparticles on a high surface tension metal and low surface tension oxide for carbon nanotube CNT growth via catalytic chemical vapor deposition CCVD . Silicon dioxide SiO2 and tantalum have been deposited as supporting layers before deposition of a thin layer of iron catalyst. Iron nanoparticles were formed after thermal anne...

This work is focused on synthesis of SiO2- CNT hybrides via sol-gel method. Homogeneous distribution of carbon nanotubes within silicon matrix was obtained by mixing the functionalized carbon nanotube (CNTCOOH) with active silicic acid followed by titration to the solution of sodium silicate (Na2SiO3) under the average temperature condition of 80?C. Different ratios of multi-walled carbon nanot...

The direct conversion of methane to C2 hydrocarbons, in a quartz tube reactor enforced by a DC corona discharge, was investigated at atmospheric pressure. The process was carried out in the presence of metal oxide catalysts of Mn/W/SiO2, Mn/W/SiO2 (tetraethyl orthosilicate, TEOS), and Mn/W/CNT (supported on carbon nanotubes). The total yield to C2 hydrocarbons in the presence of metal oxide cat...

Selective area growth of carbon nanotubes (CNT) has been used to control the diameter of CNTs. Narrow lines of SiO2 (12−60 nm) are formed at the cleaved face of a Si/SiO2/Si multilayer structure. CNTs are then grown by a chemical vapor deposition process with a ferrocene/xylene/ H2/Ar mixture at 700 °C. CNTs are observed to grow only on the exposed SiO2 surface at the edge of the “mesa” structu...

It has been more than a decade since the thermal conductivity of vertically aligned carbon nanotube (VACNT) arrays was reported possible to exceed that of the best thermal greases or phase change materials by an order of magnitude. Despite tremendous prospects as a thermal interface material (TIM), results were discouraging for practical applications. The primary reason is the large thermal con...

A nitrogen-doped mesoporous carbon containing a network of carbon nanotubes (CNTs) was produced for use as a catalyst for the oxygen reduction reaction (ORR). SiO2 nanoparticles were decorated with clusters of Fe atoms to act as catalyst seeds for CNT growth, after which the material was impregnated with aniline. After polymerization of the aniline, the material was pyrolysed and the SiO2 was r...

Suspensions of nanoparticles (SiO2, SiC, TiO2, CNT, Nanoclay and Hydroxyapatite) were spray dried to produce dry granulated products. The nanoparticles were consolidated in granules making them more convenient and safer to use in further processing compared to handling of nanopowders.